From: Valentine Barshak valentine.barshak@cogentembedded.com
Import R8A77980 V3HSK DTs from Linux 6.1.31, commit d2869ace6eeb ("Linux 6.1.31"). Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut marek.vasut+renesas@mailbox.org Signed-off-by: Valentine Barshak valentine.barshak@cogentembedded.com Signed-off-by: Hai Pham hai.pham.ud@renesas.com Signed-off-by: Tam Nguyen tam.nguyen.xa@renesas.com Signed-off-by: Marek Vasut marek.vasut+renesas@mailbox.org # Sync with 6.1.31 --- arch/arm/dts/r8a77980-v3hsk.dts | 292 ++++++++++++++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 arch/arm/dts/r8a77980-v3hsk.dts
diff --git a/arch/arm/dts/r8a77980-v3hsk.dts b/arch/arm/dts/r8a77980-v3hsk.dts new file mode 100644 index 00000000000..d168b0e7747 --- /dev/null +++ b/arch/arm/dts/r8a77980-v3hsk.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the V3H Starter Kit board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77980.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas V3H Starter Kit board"; + compatible = "renesas,v3hsk", "renesas,r8a77980"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &scif0; + ethernet0 = &gether; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc3v3_d5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc1v8_d4: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_D4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3_d5: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_D5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc1v8_d4>; + dvdd-supply = <&vcc1v8_d4>; + pvdd-supply = <&vcc1v8_d4>; + bgvdd-supply = <&vcc1v8_d4>; + dvdd-3v-supply = <&vcc3v3_d5>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&pfc { + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +};