From: Wenyou Yang wenyou.yang@atmel.com
Convert the board to enable the driver model support for LCD/video.
Signed-off-by: Wenyou Yang wenyou.yang@microchip.com ---
arch/arm/dts/at91-sama5d4_xplained.dts | 25 ++++++ arch/arm/dts/sama5d4.dtsi | 21 +---- arch/arm/mach-at91/Kconfig | 1 + board/atmel/common/video_display.c | 2 +- board/atmel/sama5d4_xplained/sama5d4_xplained.c | 102 ++---------------------- configs/sama5d4_xplained_mmc_defconfig | 2 + configs/sama5d4_xplained_nandflash_defconfig | 2 + configs/sama5d4_xplained_spiflash_defconfig | 2 + include/configs/sama5d4_xplained.h | 11 --- 9 files changed, 40 insertions(+), 128 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts index 0592b31b91..ea35dc21b6 100644 --- a/arch/arm/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/dts/at91-sama5d4_xplained.dts @@ -74,6 +74,31 @@
ahb { apb { + hlcdc: hlcdc@f0000000 { + atmel,vl-bpix = <4>; + atmel,guard-time = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>; + status = "okay"; + u-boot,dm-pre-reloc; + + display-timings { + u-boot,dm-pre-reloc; + 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hsync-len = <41>; + hfront-porch = <2>; + hback-porch = <2>; + vfront-porch = <2>; + vback-porch = <2>; + vsync-len = <11>; + u-boot,dm-pre-reloc; + }; + }; + }; + spi0: spi@f8010000 { u-boot,dm-pre-reloc; cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi index c6512ae437..8072b8a4f2 100644 --- a/arch/arm/dts/sama5d4.dtsi +++ b/arch/arm/dts/sama5d4.dtsi @@ -320,31 +320,12 @@ u-boot,dm-pre-reloc;
hlcdc: hlcdc@f0000000 { - compatible = "atmel,sama5d4-hlcdc"; + compatible = "atmel,at91sam9x5-hlcdc"; reg = <0xf0000000 0x4000>; interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; };
dma1: dma-controller@f0004000 { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index d2db644fcf..3cc37f431b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -117,6 +117,7 @@ config TARGET_SAMA5D4_XPLAINED select CPU_V7 select SUPPORT_SPL select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT
config TARGET_SAMA5D4EK bool "SAMA5D4 Evaluation Kit" diff --git a/board/atmel/common/video_display.c b/board/atmel/common/video_display.c index 39ad619819..b20abc7386 100644 --- a/board/atmel/common/video_display.c +++ b/board/atmel/common/video_display.c @@ -43,7 +43,7 @@ int at91_video_show_board_info(void) nand_size = 0; #ifdef CONFIG_NAND_ATMEL for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i]->size; + nand_size += get_nand_dev_by_index(i)->size; #endif
len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n", diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 248a31b8c4..8fa84670f1 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -14,11 +14,7 @@ #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <nand.h> -#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -73,98 +69,15 @@ static void sama5d4_xplained_usb_hw_init(void) } #endif
-#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 41, - .vl_left_margin = 2, - .vl_right_margin = 2, - .vl_vsync_len = 11, - .vl_upper_margin = 2, - .vl_lower_margin = 2, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void sama5d4_xplained_lcd_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2014 ATMEL Corp\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; -#ifdef CONFIG_NAND_ATMEL - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); #endif - lcd_printf("%ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, nand_size >> 20); + return 0; } -#endif /* CONFIG_LCD_INFO */ - -#endif /* CONFIG_LCD */ +#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT static void sama5d4_xplained_serial3_hw_init(void) @@ -212,9 +125,6 @@ int board_init(void) #ifdef CONFIG_NAND_ATMEL sama5d4_xplained_nand_hw_init(); #endif -#ifdef CONFIG_LCD - sama5d4_xplained_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB sama5d4_xplained_usb_hw_init(); #endif diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 928d828a1a..246d92f286 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -74,3 +74,5 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_FAT_WRITE=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index c61d235384..694d767998 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -70,3 +70,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 7c8c7081e8..2e27e5f1ad 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -72,3 +72,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 67a8574940..ddb48c335a 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -49,17 +49,6 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #endif
-/* LCD */ -#ifdef CONFIG_LCD -#define LCD_BPP LCD_COLOR16 -#define LCD_OUTPUT_BPP 24 -#define CONFIG_LCD_LOGO -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_HLCD -#define CONFIG_ATMEL_LCD_RGB565 -#endif - #ifdef CONFIG_SYS_USE_SERIALFLASH /* override the bootcmd, bootargs and other configuration for spi flash env */ #elif CONFIG_SYS_USE_NANDFLASH