Add GPIO driver for the Renesas RCar SoCs . The driver currently supports only the RCar Gen3 R8A7795 and R8A7796 SoCs, but is easily extensible for the other RCar SoCs as well.
This driver is meant to replace the pinmux part of SH_GPIO_PFC driver.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Nobuhiro Iwamatsu iwamatsu@nigauri.org --- drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-rcar.c | 169 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 176 insertions(+) create mode 100644 drivers/gpio/gpio-rcar.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ffeda9425a..6240c39539 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -135,6 +135,12 @@ config PCF8575_GPIO Support for PCF8575 I2C 16-bit GPIO expander. Most of these chips are from NXP and TI.
+config RCAR_GPIO + bool "Renesas RCar GPIO driver" + depends on DM_GPIO && ARCH_RMOBILE + help + This driver supports the GPIO banks on Renesas RCar SoCs. + config ROCKCHIP_GPIO bool "Rockchip GPIO driver" depends on DM_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 1396467ab6..81f55a576b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o obj-$(CONFIG_PCA953X) += pca953x.o obj-$(CONFIG_PCA9698) += pca9698.o obj-$(CONFIG_ROCKCHIP_GPIO) += rk_gpio.o +obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o obj-$(CONFIG_S5P) += s5p_gpio.o obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o obj-$(CONFIG_SPEAR_GPIO) += spear_gpio.o diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c new file mode 100644 index 0000000000..8504dceb84 --- /dev/null +++ b/drivers/gpio/gpio-rcar.c @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2017 Marek Vasut marek.vasut@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <errno.h> +#include <asm/gpio.h> +#include <asm/io.h> + +#define GPIO_IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ +#define GPIO_INOUTSEL 0x04 /* General Input/Output Switching Register */ +#define GPIO_OUTDT 0x08 /* General Output Register */ +#define GPIO_INDT 0x0c /* General Input Register */ +#define GPIO_INTDT 0x10 /* Interrupt Display Register */ +#define GPIO_INTCLR 0x14 /* Interrupt Clear Register */ +#define GPIO_INTMSK 0x18 /* Interrupt Mask Register */ +#define GPIO_MSKCLR 0x1c /* Interrupt Mask Clear Register */ +#define GPIO_POSNEG 0x20 /* Positive/Negative Logic Select Register */ +#define GPIO_EDGLEVEL 0x24 /* Edge/level Select Register */ +#define GPIO_FILONOFF 0x28 /* Chattering Prevention On/Off Register */ +#define GPIO_BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ + +#define RCAR_MAX_GPIO_PER_BANK 32 + +DECLARE_GLOBAL_DATA_PTR; + +struct rcar_gpio_priv { + void __iomem *regs; +}; + +static int rcar_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct rcar_gpio_priv *priv = dev_get_priv(dev); + const u32 bit = BIT(offset); + + /* + * Testing on r8a7790 shows that INDT does not show correct pin state + * when configured as output, so use OUTDT in case of output pins. + */ + if (readl(priv->regs + GPIO_INOUTSEL) & bit) + return !!(readl(priv->regs + GPIO_OUTDT) & bit); + else + return !!(readl(priv->regs + GPIO_INDT) & bit); +} + +static int rcar_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct rcar_gpio_priv *priv = dev_get_priv(dev); + + if (value) + setbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); + else + clrbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); + + return 0; +} + +static void rcar_gpio_set_direction(void __iomem *regs, unsigned offset, + bool output) +{ + /* + * follow steps in the GPIO documentation for + * "Setting General Output Mode" and + * "Setting General Input Mode" + */ + + /* Configure postive logic in POSNEG */ + clrbits_le32(regs + GPIO_POSNEG, BIT(offset)); + + /* Select "General Input/Output Mode" in IOINTSEL */ + clrbits_le32(regs + GPIO_IOINTSEL, BIT(offset)); + + /* Select Input Mode or Output Mode in INOUTSEL */ + if (output) + setbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); + else + clrbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); +} + +static int rcar_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct rcar_gpio_priv *priv = dev_get_priv(dev); + + rcar_gpio_set_direction(priv->regs, offset, false); + + return 0; +} + +static int rcar_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct rcar_gpio_priv *priv = dev_get_priv(dev); + + /* write GPIO value to output before selecting output mode of pin */ + rcar_gpio_set_value(dev, offset, value); + rcar_gpio_set_direction(priv->regs, offset, true); + + return 0; +} + +static int rcar_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct rcar_gpio_priv *priv = dev_get_priv(dev); + + if (readl(priv->regs + GPIO_INOUTSEL) & BIT(offset)) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static const struct dm_gpio_ops rcar_gpio_ops = { + .direction_input = rcar_gpio_direction_input, + .direction_output = rcar_gpio_direction_output, + .get_value = rcar_gpio_get_value, + .set_value = rcar_gpio_set_value, + .get_function = rcar_gpio_get_function, +}; + +static int rcar_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct rcar_gpio_priv *priv = dev_get_priv(dev); + struct fdtdec_phandle_args args; + struct clk clk; + int node = dev_of_offset(dev); + int ret; + + priv->regs = (void __iomem *)devfdt_get_addr(dev); + uc_priv->bank_name = dev->name; + + ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges", + NULL, 3, 0, &args); + uc_priv->gpio_count = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret < 0) { + dev_err(dev, "Failed to get GPIO bank clock\n"); + return ret; + } + + ret = clk_enable(&clk); + clk_free(&clk); + if (ret) { + dev_err(dev, "Failed to enable GPIO bank clock\n"); + return ret; + } + + return 0; +} + +static const struct udevice_id rcar_gpio_ids[] = { + { .compatible = "renesas,gpio-r8a7795" }, + { .compatible = "renesas,gpio-r8a7796" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(rcar_gpio) = { + .name = "rcar-gpio", + .id = UCLASS_GPIO, + .of_match = rcar_gpio_ids, + .ops = &rcar_gpio_ops, + .priv_auto_alloc_size = sizeof(struct rcar_gpio_priv), + .probe = rcar_gpio_probe, +};