The SDHC clock divider value for LS1028A should be default 2, not 1.
Signed-off-by: Yangbo Lu yangbo.lu@nxp.com --- configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 - configs/ls1028aqds_tfa_defconfig | 1 - configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 - configs/ls1028ardb_tfa_defconfig | 1 - 4 files changed, 4 deletions(-)
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index a69e892..149f0b6 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -3,7 +3,6 @@ CONFIG_TARGET_LS1028AQDS=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_NXP_ESBC=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 538830d..da59b9c 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028AQDS=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 55769c7..e287d08 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -3,7 +3,6 @@ CONFIG_TARGET_LS1028ARDB=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_NXP_ESBC=y -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 870d6b7..4ceecbc 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028ARDB=y CONFIG_TFABOOT=y CONFIG_SYS_MALLOC_F_LEN=0x6000 -CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 CONFIG_NR_DRAM_BANKS=2