
On Fri, Oct 23, 2020 at 08:50:56AM +0000, Anastasiia Lukianenko wrote:
Hello,
On Thu, 2020-10-22 at 18:53 +0900, takahiro.akashi@linaro.org wrote:
On Thu, Oct 22, 2020 at 09:19:41AM +0000, Anastasiia Lukianenko wrote:
Hi,
On Thu, 2020-10-15 at 13:25 +0900, AKASHI Takahiro wrote:
By using a hypervisor call, we can implement DEBUG_UART on xen. This will allow us to see messages even earlier than serial_init().
Signed-off-by: AKASHI Takahiro takahiro.akashi@linaro.org
drivers/serial/Kconfig | 14 +++++++++++--- drivers/serial/serial_xen.c | 20 ++++++++++++++++++++ 2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e344677f91f6..536cf0641773 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -401,11 +401,19 @@ config DEBUG_UART_MTK driver will be available until the real driver model serial is running.
+config DEBUG_UART_XEN
- bool "XEN Hypervisor Console"
- depends on XEN_SERIAL
- help
Select this to enable a debug UART using the serial_xen
driver. You
will not have to provide any parameters to make this work.
The driver
will be available until the real driver-model serial
is running.
endchoice
config DEBUG_UART_BASE hex "Base address of UART"
- depends on DEBUG_UART
- depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART_SANDBOX help This is the base address of your UART for memory-mapped
UARTs. @@ -415,7 +423,7 @@ config DEBUG_UART_BASE
config DEBUG_UART_CLOCK int "UART input clock"
- depends on DEBUG_UART
- depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART_SANDBOX help The UART input clock determines the speed of the internal
UART @@ -427,7 +435,7 @@ config DEBUG_UART_CLOCK
config DEBUG_UART_SHIFT int "UART register shift"
- depends on DEBUG_UART
- depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART help Some UARTs (notably ns16550) support different register
layouts diff --git a/drivers/serial/serial_xen.c b/drivers/serial/serial_xen.c index ed191829f059..34c90ece40fc 100644 --- a/drivers/serial/serial_xen.c +++ b/drivers/serial/serial_xen.c @@ -5,6 +5,7 @@ */ #include <common.h> #include <cpu_func.h> +#include <debug_uart.h> #include <dm.h> #include <serial.h> #include <watchdog.h> @@ -15,11 +16,14 @@ #include <xen/events.h>
#include <xen/interface/sched.h> +#include <xen/interface/xen.h> #include <xen/interface/hvm/hvm_op.h> #include <xen/interface/hvm/params.h> #include <xen/interface/io/console.h> #include <xen/interface/io/ring.h>
+#include <asm/xen/hypercall.h>
DECLARE_GLOBAL_DATA_PTR;
u32 console_evtchn; @@ -178,3 +182,19 @@ U_BOOT_DRIVER(serial_xen) = { .flags = DM_FLAG_PRE_RELOC, };
+#if defined(CONFIG_DEBUG_UART_XEN) +static inline void _debug_uart_init(void) {}
+static inline void _debug_uart_putc(int c) +{ +#if CONFIG_IS_ENABLED(ARM)
- xen_debug_putc(c);
+#else
- /* the type cast should work on LE only */
- HYPERVISOR_console_io(CONSOLEIO_write, 1, (char *)&ch);
An error occurs during compilation: drivers/serial/serial_xen.c: error: ‘ch’ undeclared (first use in this function); did you mean ‘c’? HYPERVISOR_console_io(CONSOLEIO_write, 1, (char *)&ch);
Ah, yes. You're now using x86, right?
No, I just tried different options and accidentally discovered this error.
No? My code is protected with "if CONFIG_IS_ENABLED(ARM)", and so you have no chance of building "else" clause unless you use x86.
Anyway,
So what happens if you have made the fix above? Does it work in your environment? (I have confirmed that HYPERVISOR_console_io version works on arm(64).)
Unfortunately, nothing happened (there are no logs mentioned earlier).
1. Have you ever executed HYPERVISOR_console_io on your platform before? 2. If possible, please try to my code on qemu, as my patch intended, so that we can determine if your issue is generic or specific on your environment?
Thanks, -Takahiro Akashi
Regards, Anastasiia
Thanks, -Takahiro Akashi
+#endif +}
+DEBUG_UART_FUNCS
+#endif
Regards, Anastasiia