On 05/12/2017 03:13 PM, patrice.chotard@st.com wrote:
From: Patrice Chotard patrice.chotard@st.com
Add CLOCK, RESET and generic PHY frameworks support
Signed-off-by: Patrice Chotard patrice.chotard@st.com
drivers/usb/host/ohci-generic.c | 40 ++++++++++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c index f3307f4..c9d8b74 100644 --- a/drivers/usb/host/ohci-generic.c +++ b/drivers/usb/host/ohci-generic.c @@ -5,7 +5,12 @@ */
#include <common.h> +#include <clk.h> #include <dm.h> +#include <fdtdec.h> +#include <generic-phy.h> +#include <reset.h>
#include "ohci.h"
#if !defined(CONFIG_USB_OHCI_NEW) @@ -19,13 +24,36 @@ struct generic_ohci { static int ohci_usb_probe(struct udevice *dev) { struct ohci_regs *regs = (struct ohci_regs *)dev_get_addr(dev);
- struct phy usb_phy;
- int i, ret;
- return ohci_register(dev, regs);
-}
- for (i = 0; ; i++) {
struct clk clk;-static int ohci_usb_remove(struct udevice *dev) -{
- return ohci_deregister(dev);
ret = clk_get_by_index(dev, i, &clk);if (ret < 0)break;if (clk_enable(&clk))error("failed to enable clock %d\n", i);clk_free(&clk);
Who disables the clock if this loop fails mid-way through ?
- }
- for (i = 0; ; i++) {
struct reset_ctl reset;ret = reset_get_by_index(dev, i, &reset);if (ret < 0)break;if (reset_deassert(&reset))error("failed to deassert reset %d\n", i);
DTTO here, plus you'll likely only have one reset .
reset_free(&reset);- }
- if (!generic_phy_get_by_index(dev, 0, &usb_phy))
if (generic_phy_init(&usb_phy))error("failed to init usb phy %d\n", i);- return ohci_register(dev, regs);
}
static const struct udevice_id ohci_usb_ids[] = { @@ -38,7 +66,7 @@ U_BOOT_DRIVER(ohci_generic) = { .id = UCLASS_USB, .of_match = ohci_usb_ids, .probe = ohci_usb_probe,
- .remove = ohci_usb_remove,
- .remove = ohci_deregister, .ops = &ohci_usb_ops, .priv_auto_alloc_size = sizeof(struct generic_ohci), .flags = DM_FLAG_ALLOC_PRIV_DMA,