Hi,
-----Original Message----- From: Jagan Teki [mailto:jagan@openedev.com] Sent: Wednesday, November 16, 2016 9:33 AM To: u-boot@lists.denx.de Cc: Jagan Teki jagan@openedev.com; Bin Meng bmeng.cn@gmail.com; York Sun york.sun@nxp.com; Vignesh R vigneshr@ti.com; Mugunthan V N mugunthanvnm@ti.com; Michal Simek michal.simek@xilinx.com; Siva Durga Prasad Paladugu sivadur@xilinx.com Subject: [PATCH v6 06/21] sf: Add SPI_FLASH_MAX_ID_LEN
Add id length of 5 bytes numerical value to macro.
Cc: Bin Meng bmeng.cn@gmail.com Cc: York Sun york.sun@nxp.com Cc: Vignesh R vigneshr@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: Michal Simek michal.simek@xilinx.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Jagan Teki jagan@openedev.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Jagan Teki jagan@openedev.com Tested-by: Jagan Teki jagan@openedev.com
drivers/mtd/spi/sf_internal.h | 3 ++- drivers/mtd/spi/spi_flash.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 70617f2..770f628 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -107,6 +107,7 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, #define JEDEC_MFR(info) ((info)->id[0]) #define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2])) #define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4])) +#define SPI_FLASH_MAX_ID_LEN 5
struct spi_flash_info { /* Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) */ @@ -117,7 +118,7 @@ struct spi_flash_info { * The first three bytes are the JEDIC ID. * JEDEC ID zero means "no ID" (mostly older chips). */
- u8 id[5];
u8 id[SPI_FLASH_MAX_ID_LEN]; u8 id_len;
/*
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index f7634df..9430424 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -928,10 +928,10 @@ static int micron_quad_enable(struct spi_flash *flash) static const struct spi_flash_info *spi_flash_read_id(struct spi_flash *flash) { int tmp;
- u8 id[5];
- u8 id[SPI_FLASH_MAX_ID_LEN]; const struct spi_flash_info *info;
- tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id, 5);
- tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id,
+SPI_FLASH_MAX_ID_LEN);
Not only here, you are reading Id again in spi_flash_scan(), use same macro there as well. Also, you are reading 6 bytes of ID, please consider the same there.
Thanks, Siva
if (tmp < 0) { printf("SF: error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); -- 1.9.1