Hello XWolf,

> i want to compile bootloader for my board(adm5120).
> i use buildroot to build a cross-toolchain.
> (some tools is:
> binutils-2.16.91.0.2.tar.bz2 gcc-3.4.4.tar.bz2 uClibc-0.9.27.tar.bz2...), and
> i can use the cross-toolchain to compile my kernel, and is ok!
> so, i use it to compile the u-boot(the patch for adm5120
> [http://www.nerdclub.nl/u-boot/adm5120-support.txt] is ok), but i got some
> error:

>snip<

> make: *** [u-boot] error 139
>
> anybody can tell me , where is wrong?

I have made that patch you're using. Always use the ELDK tool set for building U-Boot, especially for the MIPS platform because there's some trickery in makefiles to determine the endianity of the compiler by it's name.

Good luck!

        Robert.