On Mon, 2015-08-31 at 14:57 -0500, dinguyen@opensource.altera.com wrote:
From: Dinh Nguyen dinguyen@opensource.altera.com
Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is a bit different because it has a KSZ9031 PHY, so for now, ethernet doesn't quite work yet, as a few patches are needed to support the PHY.
Signed-off-by: Dinh Nguyen dinguyen@opensource.altera.com
Hi Marek,
This patch is based on your u-boot-socfpga/wip/boards branch.
Thanks, Dinh
arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_cyclone5_de0_sockit.dts | 61 +++ arch/arm/mach-socfpga/Kconfig | 7 + board/terasic/de0/MAINTAINERS | 5 + board/terasic/de0/Makefile | 9 + board/terasic/de0/qts/iocsr_config.h | 658 +++++++++++++++++++++++++++ board/terasic/de0/qts/pinmux_config.h | 220 +++++++++ board/terasic/de0/qts/pll_config.h | 85 ++++ board/terasic/de0/qts/sdram_config.h | 342 ++++++++++++++ board/terasic/de0/socfpga.c | 22 + configs/socfpga_de0_defconfig | 21 + include/configs/socfpga_de0.h | 88 ++++ 12 files changed, 1519 insertions(+) create mode 100644 arch/arm/dts/socfpga_cyclone5_de0_sockit.dts create mode 100644 board/terasic/de0/MAINTAINERS create mode 100644 board/terasic/de0/Makefile create mode 100644 board/terasic/de0/qts/iocsr_config.h create mode 100644 board/terasic/de0/qts/pinmux_config.h create mode 100644 board/terasic/de0/qts/pll_config.h create mode 100644 board/terasic/de0/qts/sdram_config.h create mode 100644 board/terasic/de0/socfpga.c create mode 100644 configs/socfpga_de0_defconfig create mode 100644 include/configs/socfpga_de0.h
diff --git a/include/configs/socfpga_de0.h b/include/configs/socfpga_de0.h new file mode 100644 index 0000000..47e18ba --- /dev/null +++ b/include/configs/socfpga_de0.h @@ -0,0 +1,88 @@ +/*
- Copyright (C) 2015 Marek Vasut marex@denx.de
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef __CONFIG_TERASIC_DE0_H__ +#define __CONFIG_TERASIC_DE0_H__
+#include <asm/arch/socfpga_base_addrs.h>
+/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG
+#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE
+/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
+/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "fitImage"
Wonder this should be zImage as the mmcload still using zImage?
Thanks Chin Liang
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET +#define CONFIG_BOOTCOMMAND "run ramboot" +#else +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#endif +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET)
+/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9031
+#endif
+/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Terasic"
+/* Extra Environment */ +#define CONFIG_HOSTNAME socfpga_cyclone5
+#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
"bootm ${loadaddr} - ${fdt_addr}\0" \- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
"fsloadcmd=ext2load\0" \- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
" root=${mmcroot} rw rootwait;" \"bootz ${loadaddr} - ${fdt_addr}\0" \- "mmcload=mmc rescan;" \
"load mmc 0:1 ${loadaddr} ${bootimage};" \"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h>
+#endif /* __CONFIG_TERASIC_DE0_H__ */