For K2E and K2L SoCs clock output from PASS PLL has to be enabled after NETCP domain and PA module are enabled. So create new function for that and call it after PA module is enabled.
Signed-off-by: Ivan Khoronzhuk ivan.khoronzhuk@ti.com --- arch/arm/cpu/armv7/keystone/clock.c | 17 +++++++++++++---- arch/arm/include/asm/arch-keystone/clock.h | 1 + board/ti/ks2_evm/board.c | 1 + 3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index 47fc893..d13fbc1 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -185,10 +185,6 @@ void init_pll(const struct pll_init_data *data) tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
- /* set PLL Select (bit 13) for PASS PLL */ - if (data->pll == PASS_PLL) - tmp |= PLLCTL_PAPLL; - __raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
/* Reset bit: bit 14 for both DDR3 & PASS PLL */ @@ -261,3 +257,16 @@ inline int get_max_arm_speed(void) return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds); } #endif + +void pass_pll_pa_clk_enable(void) +{ + u32 reg; + + reg = readl(keystone_pll_regs[PASS_PLL].reg1); + + reg |= PLLCTL_PAPLL; + writel(reg, keystone_pll_regs[PASS_PLL].reg1); + + /* wait till clock is enabled */ + sdelay(15000); +} diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h index bc31267..9480e62 100644 --- a/arch/arm/include/asm/arch-keystone/clock.h +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -50,6 +50,7 @@ void init_pll(const struct pll_init_data *data); unsigned long clk_get_rate(unsigned int clk); unsigned long clk_round_rate(unsigned int clk, unsigned long hz); int clk_set_rate(unsigned int clk, unsigned long hz); +void pass_pll_pa_clk_enable(void); int get_max_dev_speed(void); int get_max_arm_speed(void);
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 279ec8e..8991786 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -77,6 +77,7 @@ int board_eth_init(bd_t *bis) return -1; if (psc_enable_module(KS2_LPSC_CRYPTO)) return -1; + pass_pll_pa_clk_enable();
port_num = get_num_eth_ports();