Re: [U-Boot-Users] can i load u-boot into RAM and jump to it as a test?

In message 20040828040400.96687.qmail@web13822.mail.yahoo.com you wrote:

I've done this (ran u-boot from ram) on many different boards and it's not that diifcult if you know what you're doing.:-)

This may be true, but it is WRONG for the original poster's question: he asked if you can run an image from RAM before birnung the SAME image to the final position in flash.

As you mentioned, many changes are necessary, and the final flash image will bue completely untested in all these areas then. And one of these untested areas is the most critical in all systems: the setup of the memory controller and SDRAM initialization.

Best regards,

Wolfgang Denk