Re: [U-Boot] [PATCH] mxc_nand: add nand driver for MX2/MX3

On 14:53 Fri 17 Jul , Ilya Yanok wrote:

Driver for NFC NAND controller found on Freescale's MX2 and MX3 processors. Ported from Linux. Tested only with i.MX27 but should works with other MX2 and MX3 processors too.

Signed-off-by: Ilya Yanok yanok@emcraft.com

drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/mxc_nand.c | 902 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 903 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/nand/mxc_nand.c

Scott for you is it fine?

Best Regards, J.