From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
Use zynq_dma_xfer_init, zynq_align_dma_buffer, zynq_dma_transfer helper function performing dma transfers so that the code can be reused easily for different cases of dma transfer.
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
Changes in v2: None
drivers/fpga/zynqpl.c | 201 +++++++++++++++++++++++++++++--------------------- 1 file changed, 115 insertions(+), 86 deletions(-)
diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 0a134e524c44..ef6d1caca410 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -152,70 +152,52 @@ static void *check_data(u8 *buf, size_t bsize, u32 *swap) return NULL; }
-static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize) +static int zynq_dma_transfer(u32 srcbuf, u32 srclen, u32 dstbuf, u32 dstlen) { - unsigned long ts; /* Timestamp */ - u32 partialbit = 0; - u32 i, control, isr_status, status, swap, diff; - u32 *buf_start; + unsigned long ts; + u32 isr_status;
- /* Detect if we are going working with partial or full bitstream */ - if (bsize != desc->size) { - printf("%s: Working with partial bitstream\n", __func__); - partialbit = 1; - } - - buf_start = check_data((u8 *)buf, bsize, &swap); - if (!buf_start) - return FPGA_FAIL; - - /* Check if data is postpone from start */ - diff = (u32)buf_start - (u32)buf; - if (diff) { - printf("%s: Bitstream is not validated yet (diff %x)\n", - __func__, diff); - return FPGA_FAIL; - } + /* Set up the transfer */ + writel((u32)srcbuf, &devcfg_base->dma_src_addr); + writel(dstbuf, &devcfg_base->dma_dst_addr); + writel(srclen, &devcfg_base->dma_src_len); + writel(dstlen, &devcfg_base->dma_dst_len);
- if ((u32)buf < SZ_1M) { - printf("%s: Bitstream has to be placed up to 1MB (%x)\n", - __func__, (u32)buf); - return FPGA_FAIL; - } + isr_status = readl(&devcfg_base->int_sts);
- if ((u32)buf != ALIGN((u32)buf, ARCH_DMA_MINALIGN)) { - u32 *new_buf = (u32 *)ALIGN((u32)buf, ARCH_DMA_MINALIGN); + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { + if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { + debug("%s: Error: isr = 0x%08X\n", __func__, + isr_status); + debug("%s: Write count = 0x%08X\n", __func__, + readl(&devcfg_base->write_count)); + debug("%s: Read count = 0x%08X\n", __func__, + readl(&devcfg_base->read_count));
- /* - * This might be dangerous but permits to flash if - * ARCH_DMA_MINALIGN is greater than header size - */ - if (new_buf > buf_start) { - debug("%s: Aligned buffer is after buffer start\n", - __func__); - new_buf -= ARCH_DMA_MINALIGN; + return FPGA_FAIL; } + if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { + printf("%s: Timeout wait for DMA to complete\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + }
- printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, - (u32)buf_start, (u32)new_buf, swap); - - for (i = 0; i < (bsize/4); i++) - new_buf[i] = load_word(&buf_start[i], swap); - - swap = SWAP_DONE; - buf = new_buf; - } else if (swap != SWAP_DONE) { - /* For bitstream which are aligned */ - u32 *new_buf = (u32 *)buf; + debug("%s: DMA transfer is done\n", __func__);
- printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, - swap); + /* Clear out the DMA status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts);
- for (i = 0; i < (bsize/4); i++) - new_buf[i] = load_word(&buf_start[i], swap); + return FPGA_SUCCESS; +}
- swap = SWAP_DONE; - } +static int zynq_dma_xfer_init(u32 partialbit) +{ + u32 status, control, isr_status; + unsigned long ts;
/* Clear loopback bit */ clrbits_le32(&devcfg_base->mctrl, DEVCFG_MCTRL_PCAP_LPBK); @@ -297,6 +279,83 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize) writel(DEVCFG_STATUS_DMA_DONE_CNT_MASK, &devcfg_base->status); }
+ return FPGA_SUCCESS; +} + +static u32 *zynq_align_dma_buffer(u32 *buf, u32 len, u32 swap) +{ + u32 *new_buf; + u32 i; + + if ((u32)buf != ALIGN((u32)buf, ARCH_DMA_MINALIGN)) { + new_buf = (u32 *)ALIGN((u32)buf, ARCH_DMA_MINALIGN); + + /* + * This might be dangerous but permits to flash if + * ARCH_DMA_MINALIGN is greater than header size + */ + if (new_buf > buf) { + debug("%s: Aligned buffer is after buffer start\n", + __func__); + new_buf -= ARCH_DMA_MINALIGN; + } + printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, + (u32)buf, (u32)new_buf, swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + + buf = new_buf; + } else if (swap != SWAP_DONE) { + /* For bitstream which are aligned */ + u32 *new_buf = (u32 *)buf; + + printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, + swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + } + + return buf; +} + +static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize) +{ + unsigned long ts; /* Timestamp */ + u32 partialbit = 0; + u32 isr_status, swap, diff; + u32 *buf_start; + + /* Detect if we are going working with partial or full bitstream */ + if (bsize != desc->size) { + printf("%s: Working with partial bitstream\n", __func__); + partialbit = 1; + } + + buf_start = check_data((u8 *)buf, bsize, &swap); + if (!buf_start) + return FPGA_FAIL; + + /* Check if data is postpone from start */ + diff = (u32)buf_start - (u32)buf; + if (diff) { + printf("%s: Bitstream is not validated yet (diff %x)\n", + __func__, diff); + return FPGA_FAIL; + } + + if ((u32)buf < SZ_1M) { + printf("%s: Bitstream has to be placed up to 1MB (%x)\n", + __func__, (u32)buf); + return FPGA_FAIL; + } + + if (zynq_dma_xfer_init(partialbit)) + return FPGA_FAIL; + + buf = zynq_align_dma_buffer((u32 *)buf, bsize, swap); + debug("%s: Source = 0x%08X\n", __func__, (u32)buf); debug("%s: Size = %zu\n", __func__, bsize);
@@ -304,37 +363,10 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize) flush_dcache_range((u32)buf, (u32)buf + roundup(bsize, ARCH_DMA_MINALIGN));
- /* Set up the transfer */ - writel((u32)buf | 1, &devcfg_base->dma_src_addr); - writel(0xFFFFFFFF, &devcfg_base->dma_dst_addr); - writel(bsize >> 2, &devcfg_base->dma_src_len); - writel(0, &devcfg_base->dma_dst_len); + if (zynq_dma_transfer((u32)buf | 1, bsize >> 2, 0xffffffff, 0)) + return FPGA_FAIL;
isr_status = readl(&devcfg_base->int_sts); - - /* Polling the PCAP_INIT status for Set */ - ts = get_timer(0); - while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { - if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { - debug("%s: Error: isr = 0x%08X\n", __func__, - isr_status); - debug("%s: Write count = 0x%08X\n", __func__, - readl(&devcfg_base->write_count)); - debug("%s: Read count = 0x%08X\n", __func__, - readl(&devcfg_base->read_count)); - - return FPGA_FAIL; - } - if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { - printf("%s: Timeout wait for DMA to complete\n", - __func__); - return FPGA_FAIL; - } - isr_status = readl(&devcfg_base->int_sts); - } - - debug("%s: DMA transfer is done\n", __func__); - /* Check FPGA configuration completion */ ts = get_timer(0); while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { @@ -348,9 +380,6 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize)
debug("%s: FPGA config done\n", __func__);
- /* Clear out the DMA status */ - writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); - if (!partialbit) zynq_slcr_devcfg_enable();
-- 1.8.2.3