Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines.
Signed-off-by: Samuel Holland samuel@sholland.org --- arch/arm/dts/sunxi-u-boot.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index 1d1c3691099..82b97a9503f 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -14,9 +14,11 @@ u-boot-sunxi-with-spl { filename = "u-boot-sunxi-with-spl.bin"; pad-byte = <0xff>; + blob { filename = "spl/sunxi-spl.bin"; }; + #ifdef CONFIG_ARM64 fit { description = "Configuration to load ATF before U-Boot"; @@ -34,6 +36,7 @@ u-boot-nodtb { }; }; + atf { description = "ARM Trusted Firmware"; type = "firmware"; @@ -47,6 +50,7 @@ load = <0x44000>; entry = <0x44000>; #endif + atf-bl31 { }; }; @@ -60,6 +64,7 @@
configurations { default = "config-1"; + @config-SEQ { description = "NAME"; firmware = "uboot";