Add .dtb-file entry to Makefile and enable Kconfig options required to configure pinctrl in SPL. Also add missing PHY_ROCKCHIP_NANENG_COMBOPHY.
Fixes: 9fdd9a546986 ("board: rockchip: add Rockchip Toybrick TB-RK3588X board") Signed-off-by: Jonas Karlman jonas@kwiboo.se --- v2: Fix Makefile entry from .dts to .dtb (Quentin) --- arch/arm/dts/Makefile | 1 + configs/toybrick-rk3588_defconfig | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 38d259a7035c..d5393429f6c5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -180,6 +180,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3588) += \ rk3588-quartzpro64.dtb \ rk3588s-rock-5a.dtb \ rk3588-rock-5b.dtb \ + rk3588-toybrick-x0.dtb \ rk3588-turing-rk1.dtb
dtb-$(CONFIG_ROCKCHIP_RV1108) += \ diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig index 38fc7906eef2..0168e014103e 100644 --- a/configs/toybrick-rk3588_defconfig +++ b/configs/toybrick-rk3588_defconfig @@ -33,8 +33,9 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y @@ -53,6 +54,8 @@ CONFIG_PHY_REALTEK=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_SPL_PINCTRL=y CONFIG_PWM_ROCKCHIP=y CONFIG_SPL_RAM=y CONFIG_BAUDRATE=1500000