Hi Simon,
Am 28.07.2011 11:22, schrieb Simon Schwarz:
Moves the early UART clock setup setup_clocks_for_console() from preloader_console_init() to s_init() of OMAP4.
I recommend putting this in your 'devkit8000 nand_spl support' series before the current '2/5 omap-common: add nand_spl support' and remove the '#ifdef CONFIG_OMAP34XX' in that patch. Albert how do you think about this?
Signed-off-by: Simon Schwarz simonschwarzcor@gmail.com
arch/arm/cpu/armv7/omap-common/spl.c | 1 - arch/arm/cpu/armv7/omap4/board.c | 1 + 2 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c index d177652..d380b3e 100644 --- a/arch/arm/cpu/armv7/omap-common/spl.c +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -259,7 +259,6 @@ void preloader_console_init(void)
I recommend adding some comment for preloader_console_init() saying 'this requires UART clocks to be enabled before' in this patch.
gd->flags |= GD_FLG_RELOC; gd->baudrate = CONFIG_BAUDRATE;
setup_clocks_for_console(); serial_init(); /* serial communications setup */
/* Avoid a second "U-Boot" coming from this string */
regards
Andreas Bießmann