Hello,
This commit was send by a mistake, the previous one is proper. So please use the previous "8-th".
On 10/24/2014 05:45 PM, Przemyslaw Marczak wrote:
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com
board/samsung/universal_c210/universal.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index c04f48c..b53def8 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -204,6 +204,21 @@ int exynos_early_init_f(void) #ifdef CONFIG_SOFT_SPI static void soft_spi_init(void) {
- char buf[16];
- /* Reserve gpios for soft SPI */
- sprintf(buf, "soft_spi_sclk");
- gpio_request(CONFIG_SOFT_SPI_GPIO_SCLK, buf);
- sprintf(buf, "soft_spi_mosi");
- gpio_request(CONFIG_SOFT_SPI_GPIO_MOSI, buf);
- sprintf(buf, "soft_spi_miso");
- gpio_request(CONFIG_SOFT_SPI_GPIO_MISO, buf);
- sprintf(buf, "soft_spi_cs");
- gpio_request(CONFIG_SOFT_SPI_GPIO_CS, buf);
- gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK, CONFIG_SOFT_SPI_MODE & SPI_CPOL); gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1);
@@ -377,6 +392,8 @@ void exynos_enable_ldo(unsigned int onoff)
int exynos_init(void) {
char buf[16];
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
switch (get_hwrev()) {
@@ -401,6 +418,13 @@ int exynos_init(void) break; }
- /* Request soft I2C gpios */
- sprintf(buf, "soft_i2c_scl");
- gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, buf);
- sprintf(buf, "soft_i2c_sda");
- gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, buf);
- #ifdef CONFIG_SOFT_SPI soft_spi_init(); #endif
Best Regards,