On Sun, 2017-03-05 at 18:16 +0100, Marek Vasut wrote:
On 03/05/2017 01:54 PM, Frank Kunz wrote:
This allows the SPL to scan the MMC for a valid uboot image on a second sector location defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR when the default location "CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + first partition offset" does not contain a valid uboot image.
Signed-off-by: Frank Kunz mailinglists@kunz-im-inter.net
:100644 100644 dd5933d43c... bd3e83ddea... M include/configs/socfpga_ de0_nano_soc.h include/configs/socfpga_de0_nano_soc.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index dd5933d43c..bd3e83ddea 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -12,6 +12,8 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
/* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
This looks like a horrid hack , didn't Dalon add support into U-Boot SPL to scan all partitions for the final u-boot image ?
I did. The 0xA2 partition can be located on any partition number now. I believe Frank places the SPL image at a 64KB offset from the start of the sdcard to skip the MBR/GPT. But per our previous debate, it is not my favored implementation as it relies on the bootrom to load the SPL once.
Also, i mentioned before that i would like to hold off on this patch set and let Ley Foon et al finish the A10 stuff.
--dalon
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot