Hi,
On 28/03/2016 14:56, Hans de Goede wrote:
Hi,
On 25-03-16 18:14, Quentin Schulz wrote:
Hi,
I am trying to get Ethernet to work through the USB port of the Sinlinx SinA33 on U-Boot to use TFTP to get the kernel and dtb files.
However, I am getting 'data abort' when using dhcp or tftp after adding: #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
to include/configs/sunxi-common.h and checking CONFIG_USB_EHCI_HCD as told in the documentation [1]
I tested this configuration with the C.H.I.P. and it is working well.
Are you perhaps building u-boot with gcc6 ? There are some known issues when building u-boot with gcc-6, which look pretty much like this.
No, I'm building with gcc-5: $ arm-linux-gnueabihf-gcc --version arm-linux-gnueabihf-gcc (Ubuntu 5.2.1-22ubuntu1) 5.2.1 20151010
Is the ethernet adapter connected to a regular usb host port, or to the otg port ?
The Ethernet adapter is connected to the regular USB host port.
Regards,
Quentin
Steps to reproduce:
- Add the following lines to include/configs/sunxi-common.h:
#define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
- make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
Sinlinx_SinA33_defconfig 3) make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- menuconfig 4) Check CONFIG_USB_EHCI_HC and save configuration 5) make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j$(nproc) 6) Prepare SDCard: sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8 7) Boot the board and run dhcp or tftp 8) Get 'data abort' and board gets reset (ethact is also not defined)
The log file is attached.
Thank you,
Quentin
[1] https://github.com/lentinj/u-boot/blob/master/doc/README.usb#L132