Re: [U-Boot] [PATCH 2/7] net: Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI

monstr@monstr.eu wrote:

From: Michal Simek monstr@monstr.eu

Here are two major changes which should go together. First is adding LL Temac driver to u-boot and the second is changing Emaclite to NET_MULTI api.

There are some changes for proper initialization too.

Signed-off-by: Michal Simek monstr@monstr.eu Signed-off-by: Michal Simek michal.simek@petalogix.com

---

.../xilinx/microblaze-generic/microblaze-generic.c | 16 + drivers/net/Makefile | 1 + drivers/net/xilinx_emaclite.c | 42 ++- drivers/net/xilinx_ll_temac.c | 567 ++++++++++++++++++++ include/configs/microblaze-generic.h | 2 + include/netdev.h | 2 + lib_microblaze/board.c | 21 +- 7 files changed, 634 insertions(+), 17 deletions(-) create mode 100644 drivers/net/xilinx_ll_temac.c

diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index f388b77..4ad9eb6 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -27,6 +27,7 @@

#include <common.h> #include <config.h> +#include <netdev.h> #include <asm/microblaze_intc.h> #include <asm/asm.h>

@@ -67,3 +68,18 @@ void fsl_init2 (void) { NULL); } #endif

+int board_eth_init(bd_t *bis) +{

• /*

• * This board either has PCI NICs or uses the CPU's TSECs
  

• * pci_eth_init() will return 0 if no NICs found, so in that case
  

• * returning -1 will force cpu_eth_init() to be called.
  

• */
  
  

Huh? I don't see a call to pci_eth_init() and don't see you using TSECs either.... C&P error, maybe?

+#ifdef CONFIG_XILINX_EMACLITE

• return xilinx_emaclite_initialize(bis);

+#endif +#ifdef CONFIG_XILINX_LL_TEMAC

• return xilinx_ll_temac_initialize(bis);

+#endif +} diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1c6e402..98cb3a1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -74,6 +74,7 @@ COBJS-$(CONFIG_ULI526X) += uli526x.o COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o +COBJS-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o

COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index cf39573..e437d16 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -25,6 +25,7 @@ #include <common.h> #include <net.h> #include <config.h> +#include <malloc.h> #include <asm/io.h>

#undef DEBUG @@ -79,7 +80,7 @@ static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; static u8 emacaddr[ENET_ADDR_LENGTH]; #endif

-void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount) +static void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)

While you're in here, can you change 'unsigned' to either 'unsigned int' or 'u32'? Apply globally.

{ unsigned int i; u32 alignbuffer; @@ -106,7 +107,7 @@ void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount) } }

-void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount) +static void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount) { unsigned i; u32 alignbuffer; @@ -133,12 +134,12 @@ void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount) *to32ptr++ = alignbuffer; }

-void eth_halt (void) +static void emaclite_halt(struct eth_device *dev) { debug ("eth_halt\n"); }

-int eth_init (bd_t * bis) +static int emaclite_init(struct eth_device *dev, bd_t *bis) { uchar enetaddr[6];

@@ -193,7 +194,7 @@ int eth_init (bd_t * bis) return 0; }

-int xemaclite_txbufferavailable (xemaclite * instanceptr) +static int xemaclite_txbufferavailable (xemaclite * instanceptr) { u32 reg; u32 txpingbusy; @@ -215,8 +216,8 @@ int xemaclite_txbufferavailable (xemaclite * instanceptr) return (!(txpingbusy && txpongbusy)); }

-int eth_send (volatile void *ptr, int len) {

+static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len) +{ unsigned int reg; unsigned int baseaddress;

@@ -292,7 +293,8 @@ int eth_send (volatile void *ptr, int len) { return 0; }

-int eth_rx (void)

+static int emaclite_recv(struct eth_device *dev) { unsigned int length; unsigned int reg; @@ -352,3 +354,27 @@ int eth_rx (void) return 1;

}

+int xilinx_emaclite_initialize (bd_t *bis) +{

• struct eth_device *dev;
• dev = malloc(sizeof(*dev));
• if (dev == NULL)

• hang();
  

• memset(dev, 0, sizeof(*dev));
• sprintf(dev->name, "Xilinx Emaclite");
• dev->iobase = 0;
• dev->priv = 0;
• dev->init = emaclite_init;
• dev->halt = emaclite_halt;
• dev->send = emaclite_send;
• dev->recv = emaclite_recv;
• eth_register(dev);
• return 0;

+}

These are pretty basic changes and don't support having more than one device. Is that appropriate for this architecture (I know nothing about microblaze)? I'd prefer for the device to contain state and device information (an object, if you will), but if there can only be one emaclite on an FPGA, then I guess this is OK.

diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c new file mode 100644 index 0000000..4b42b06 --- /dev/null +++ b/drivers/net/xilinx_ll_temac.c @@ -0,0 +1,567 @@ +/*

• • Xilinx xps_ll_temac ethernet driver for u-boot
• • Author: Yoshio Kashiwagi kashiwagi@co-nss.co.jp
• • Copyright (C) 2008 Nissin Systems Co.,Ltd.
• • March 2008 created
• • Copyright (C) 2008 - 2009 Michal Simek monstr@monstr.eu
• • June 2008 Microblaze optimalization, FIFO mode support
• • This program is free software; you can redistribute it and/or modify it
• • under the terms of the GNU General Public License as published by the
• • Free Software Foundation; either version 2 of the License, or (at your
• • option) any later version.
• */

+#include <config.h> +#include <common.h> +#include <net.h> +#include <malloc.h> +#include <asm/processor.h> +#include <asm/io.h>

+#ifdef XILINX_LLTEMAC_FIFO_BASEADDR +# define FIFO_MODE 1 +#elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR +# define SDMA_MODE 1 +#else +# error Unsupported mode

Can you make this error more descriptive please (at least mention which driver)

+#endif

+#undef ETH_HALTING

+#ifdef SDMA_MODE +/* XPS_LL_TEMAC SDMA registers definition */ +# define TX_NXTDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x00) +# define TX_CURBUF_ADDR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x04) +# define TX_CURBUF_LENGTH (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x08) +# define TX_CURDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x0c) +# define TX_TAILDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x10) +# define TX_CHNL_CTRL (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x14) +# define TX_IRQ_REG (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x18) +# define TX_CHNL_STS (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x1c)

+# define RX_NXTDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x20) +# define RX_CURBUF_ADDR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x24) +# define RX_CURBUF_LENGTH (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x28) +# define RX_CURDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x2c) +# define RX_TAILDESC_PTR (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x30) +# define RX_CHNL_CTRL (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x34) +# define RX_IRQ_REG (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x38) +# define RX_CHNL_STS (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x3c)

+# define DMA_CONTROL_REG (XILINX_LLTEMAC_SDMA_CTRL_BASEADDR + 0x40) +#endif

+/* XPS_LL_TEMAC direct registers definition */ +#define TEMAC_RAF0 (XILINX_LLTEMAC_BASEADDR + 0x00) +#define TEMAC_TPF0 (XILINX_LLTEMAC_BASEADDR + 0x04) +#define TEMAC_IFGP0 (XILINX_LLTEMAC_BASEADDR + 0x08) +#define TEMAC_IS0 (XILINX_LLTEMAC_BASEADDR + 0x0c) +#define TEMAC_IP0 (XILINX_LLTEMAC_BASEADDR + 0x10) +#define TEMAC_IE0 (XILINX_LLTEMAC_BASEADDR + 0x14)

+#define TEMAC_MSW0 (XILINX_LLTEMAC_BASEADDR + 0x20) +#define TEMAC_LSW0 (XILINX_LLTEMAC_BASEADDR + 0x24) +#define TEMAC_CTL0 (XILINX_LLTEMAC_BASEADDR + 0x28) +#define TEMAC_RDY0 (XILINX_LLTEMAC_BASEADDR + 0x2c)

Please put these registers in a struct and access it using io accessors (writel, writew etc.). Put the base addresses either in dev->iobase or in a priv data structure pointed to by dev->priv

+#define XTE_RSE_MIIM_RR_MASK 0x0002 +#define XTE_RSE_MIIM_WR_MASK 0x0004 +#define XTE_RSE_CFG_RR_MASK 0x0020 +#define XTE_RSE_CFG_WR_MASK 0x0040

+/* XPS_LL_TEMAC indirect registers offset definition */

+#define RCW0 0x200 +#define RCW1 0x240 +#define TC 0x280 +#define FCC 0x2c0 +#define EMMC 0x300 +#define PHYC 0x320 +#define MC 0x340 +#define UAW0 0x380 +#define UAW1 0x384 +#define MAW0 0x388 +#define MAW1 0x38c +#define AFM 0x390 +#define TIS 0x3a0 +#define TIE 0x3a4 +#define MIIMWD 0x3b0 +#define MIIMAI 0x3b4

+#define CNTLREG_WRITE_ENABLE_MASK 0x8000 +#define CNTLREG_EMAC1SEL_MASK 0x0400 +#define CNTLREG_ADDRESSCODE_MASK 0x03ff

+#define MDIO_ENABLE_MASK 0x40 +#define MDIO_CLOCK_DIV_MASK 0x3F +#define MDIO_CLOCK_DIV_100MHz 0x28

+#define ETHER_MTU 1520

+#ifdef SDMA_MODE +/* CDMAC descriptor status bit definitions */ +# define BDSTAT_ERROR_MASK 0x80 +# define BDSTAT_INT_ON_END_MASK 0x40 +# define BDSTAT_STOP_ON_END_MASK 0x20 +# define BDSTAT_COMPLETED_MASK 0x10 +# define BDSTAT_SOP_MASK 0x08 +# define BDSTAT_EOP_MASK 0x04 +# define BDSTAT_CHANBUSY_MASK 0x02 +# define BDSTAT_CHANRESET_MASK 0x01

+/* SDMA Buffer Descriptor */

+typedef struct cdmac_bd_t {

• struct cdmac_bd_t *next_p;
• unsigned char *phys_buf_p;
• unsigned long buf_len;
• unsigned char stat;
• unsigned char app1_1;
• unsigned short app1_2;
• unsigned long app2;
• unsigned long app3;
• unsigned long app4;
• unsigned long app5;

+} cdmac_bd __attribute((aligned(32))) ;

+static cdmac_bd tx_bd; +static cdmac_bd rx_bd; +#endif

+#ifdef FIFO_MODE +typedef struct ll_fifo_s {

• int isr; /* Interrupt Status Register 0x0 */
• int ier; /* Interrupt Enable Register 0x4 */
• int tdfr; /* Transmit data FIFO reset 0x8 */
• int tdfv; /* Transmit data FIFO Vacancy 0xC */
• int tdfd; /* Transmit data FIFO 32bit wide data write port 0x10 */
• int tlf; /* Write Transmit Length FIFO 0x14 */
• int rdfr; /* Read Receive data FIFO reset 0x18 */
• int rdfo; /* Receive data FIFO Occupancy 0x1C */
• int rdfd; /* Read Receive data FIFO 32bit wide data read port 0x20 */
• int rlf; /* Read Receive Length FIFO 0x24 */
• int llr; /* Read LocalLink reset 0x28 */

+} ll_fifo_s;

+ll_fifo_s *ll_fifo = (ll_fifo_s *) (XILINX_LLTEMAC_FIFO_BASEADDR); +#endif

+static unsigned char tx_buffer[ETHER_MTU] __attribute((aligned(32))); +static unsigned char rx_buffer[ETHER_MTU] __attribute((aligned(32)));

+struct xps_ll_temac_private {

• int idx;
• unsigned char dev_addr[6];

+};

+#ifdef DEBUG +/* undirect hostif write to ll_temac */ +static void xps_ll_temac_hostif_set(int emac, int phy_addr,

• 			int reg_addr, int phy_data)
  

+{

• out_be32((u32 *)TEMAC_LSW0, phy_data);
• out_be32((u32 *)TEMAC_CTL0, CNTLREG_WRITE_ENABLE_MASK | MIIMWD);
• out_be32((u32 *)TEMAC_LSW0, (phy_addr << 5) | (reg_addr));
• out_be32((u32 *)TEMAC_CTL0, \

• 	CNTLREG_WRITE_ENABLE_MASK | MIIMAI | (emac << 10));
  

• while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_MIIM_WR_MASK));

+} +#endif

+/* undirect hostif read from ll_temac */ +static unsigned int xps_ll_temac_hostif_get(int emac, int phy_addr, int reg_addr) +{

• out_be32((u32 *)TEMAC_LSW0, (phy_addr << 5) | (reg_addr));
• out_be32((u32 *)TEMAC_CTL0, MIIMAI | (emac << 10));
• while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_MIIM_RR_MASK));
• return in_be32((u32 *)TEMAC_LSW0);

+}

+/* undirect write to ll_temac */ +static void xps_ll_temac_indirect_set(int emac, int reg_offset, int reg_data) +{

• out_be32((u32 *)TEMAC_LSW0, reg_data);
• out_be32((u32 *)TEMAC_CTL0, \

• 	CNTLREG_WRITE_ENABLE_MASK | (emac << 10) | reg_offset);
  

• while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_CFG_WR_MASK));

+}

+/* undirect read from ll_temac */ +static int xps_ll_temac_indirect_get(int emac, int reg_offset) +{

• out_be32((u32 *)TEMAC_CTL0, (emac << 10) | reg_offset);
• while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_CFG_RR_MASK));
• return in_be32((u32 *)TEMAC_LSW0);

+}

+#ifdef DEBUG +/* read from phy */ +static void read_phy_reg (int phy_addr) +{

• int j, result;
• printf("phy%d ",phy_addr);
• for ( j = 0; j < 32; j++) {

• result = xps_ll_temac_hostif_get(0, phy_addr, j);
  

• printf("%d: 0x%x ", j, result);
  

• }
• puts("\n");

+} +#endif

+static int phy_addr = -1; +static int link = 0;

+/* setting ll_temac and phy to proper setting */ +static int xps_ll_temac_phy_ctrl(void) +{

• int i;
• unsigned int result;
• unsigned retries = 10;
• if(link == 1)

• return 1; /* link is setup */
  

• /* wait for link up */
• while (retries-- &&

• ((xps_ll_temac_hostif_get(0, phy_addr, 1) & 0x24) == 0x24))
  

• ;
  

• if(phy_addr == -1) {

• for(i = 31; i >= 0; i--) {
  

• 	result = xps_ll_temac_hostif_get(0, i, 1);
  

• 	if((result & 0x0ffff) != 0x0ffff) {
  

+#ifdef DEBUG

• 		printf ("phy %x result %x\n", i, result);
  

+#endif

Please use debug() instead. Apply globally.

• 		phy_addr = i;
  

• 		break;
  

• 	}
  

• }
  

• }
• /* get PHY id */
• i = (xps_ll_temac_hostif_get(0, phy_addr, 2) << 16) | \

• xps_ll_temac_hostif_get(0, phy_addr, 3);
  

+#ifdef DEBUG

• printf("LL_TEMAC: Phy ID 0x%x\n", i);

+#endif

+#ifdef DEBUG

• xps_ll_temac_hostif_set(0, 0, 0, 0x8000); /* phy reset */

+#endif

• /* FIXME this part will be replaced by PHY lib */
• /* s3e boards */
• if (i == 0x7c0a3) {

• xps_ll_temac_indirect_set(0, EMMC, 0x40000000); /* 100BASE-T/FD */
  

• link = 1;
  

• return 1;
  

• }
• /* Marwell 88e1111 id - ml50x */
• if (i == 0x1410cc2) {

• result = xps_ll_temac_hostif_get(0, phy_addr, 5);
  

• if((result & 0x8000) == 0x8000) {
  

• 	xps_ll_temac_indirect_set(0, EMMC, 0x80000000);
  

• 	printf("1000BASE-T/FD\n");
  

• 	link = 1;
  

• } else if((result & 0x4000) == 0x4000) {
  

• 	xps_ll_temac_indirect_set(0, EMMC, 0x40000000);
  

• 	printf("100BASE-T/FD\n");
  

• 	link = 1;
  

• } else {
  

• 	printf("Unsupported mode\n");
  

• 	link = 0;
  

• }
  

• return 1;
  

• }
• return 0;

+}

+#ifdef SDMA_MODE +/* bd init */ +static void xps_ll_temac_bd_init(void) +{

• memset((void *)&tx_bd, 0, sizeof(cdmac_bd));
• memset((void *)&rx_bd, 0, sizeof(cdmac_bd));
• rx_bd.phys_buf_p = &rx_buffer[0];
• rx_bd.next_p = &rx_bd;
• rx_bd.buf_len = ETHER_MTU;
• flush_cache((u32)&rx_bd, sizeof(cdmac_bd));
• out_be32((u32 *)RX_CURDESC_PTR, (u32)&rx_bd);
• out_be32((u32 *)RX_TAILDESC_PTR, (u32)&rx_bd);
• out_be32((u32 *)RX_NXTDESC_PTR, (u32)&rx_bd); /* setup first fd */
• tx_bd.phys_buf_p = &tx_buffer[0];
• tx_bd.next_p = &tx_bd;
• flush_cache((u32)&tx_bd, sizeof(cdmac_bd));
• out_be32((u32 *)TX_CURDESC_PTR, (u32)&tx_bd);

+} +#endif

+#ifdef SDMA_MODE +static int xps_ll_temac_send_sdma(unsigned char *buffer, int length) +{

• if( xps_ll_temac_phy_ctrl() == 0)

• return 0;
  

• memcpy (tx_buffer, buffer, length);
• flush_cache ((u32)tx_buffer, length);
• tx_bd.stat = BDSTAT_SOP_MASK | BDSTAT_EOP_MASK | BDSTAT_STOP_ON_END_MASK;
• tx_bd.buf_len = length;
• flush_cache ((u32)&tx_bd, sizeof(cdmac_bd));
• out_be32((u32 *)TX_CURDESC_PTR, (u32)&tx_bd);
• out_be32((u32 *)TX_TAILDESC_PTR, (u32)&tx_bd); /* DMA start */
• do {

• flush_cache ((u32)&tx_bd, sizeof(cdmac_bd));
  

• } while(!(((volatile int)tx_bd.stat) & BDSTAT_COMPLETED_MASK));
• return length;

+}

+static int xps_ll_temac_recv_sdma(void) +{

• int length;
• flush_cache ((u32)&rx_bd, sizeof(cdmac_bd));
• if(!(rx_bd.stat & BDSTAT_COMPLETED_MASK)) {

• return 0;
  

• }
• length = rx_bd.app5;
• flush_cache ((u32)rx_bd.phys_buf_p, length);
• rx_bd.buf_len = ETHER_MTU;
• rx_bd.stat = 0;
• rx_bd.app5 = 0;
• flush_cache ((u32)&rx_bd, sizeof(cdmac_bd));
• out_be32((u32 *)RX_TAILDESC_PTR, (u32)&rx_bd);
• if(length > 0) {

• NetReceive(rx_bd.phys_buf_p, length);
  

• }
• return length;

+} +#endif

+#ifdef FIFO_MODE +static void debugll(int count) +{

• printf ("%d fifo isr 0x%08x, fifo_ier 0x%08x, fifo_rdfr 0x%08x, fifo_rdfo 0x%08x fifo_rlr 0x%08x\n",count, ll_fifo->isr, \

line's way too long

• ll_fifo->ier, ll_fifo->rdfr, ll_fifo->rdfo, ll_fifo->rlf);

+}

+static int xps_ll_temac_send_fifo(unsigned char *buffer, int length) +{

• u32 *buf = buffer;
• u32 len, i, val;
• len = (length / 4) + 1;
• for (i = 0; i < len; i++) {

• val = *buf++;
  

• ll_fifo->tdfd = val;
  

• }
• ll_fifo->tlf = length;
• return length;

+}

+static int xps_ll_temac_recv_fifo() +{

• int len, len2, i, val;
• int *buf;
• buf = &rx_buffer;
• if (ll_fifo->isr & 0x04000000 ) {

• ll_fifo->isr = 0xffffffff; /* reset isr */
  

• /* while (ll_fifo->isr); */
  

• len = ll_fifo->rlf & 0x7FF;
  

• len2 = (len / 4) + 1;
  

• for (i = 0; i < len2; i++) {
  

• 	val = ll_fifo->rdfd;
  

• 	*buf++ = val ;
  

• }
  

• /* debugll(1); */
  

• NetReceive (&rx_buffer, len);
  

• }
• return 0;

+} +#endif

+/* setup mac addr */ +static int xps_ll_temac_addr_setup(struct xps_ll_temac_private * lp) +{

• char * env_p;
• char * end;
• int i, val;
• env_p = getenv("ethaddr");
• if (env_p == NULL) {

• printf("cannot get enviroment for \"ethaddr\".\n");
  
  

s/enviroment/environment/

• return -1;
  

• }

Also, your driver does'nt need to get the address from the environment. The net library fills dev->enetaddr in eth_initialize().

• for (i = 0; i < 6; i++) {

• lp->dev_addr[i] = env_p ? simple_strtoul(env_p, &end, 16) : 0;
  

• if (env_p) env_p = (*end) ? end + 1 : end;
  

• }
• /* set up unicast MAC address filter */
• val = ((lp->dev_addr[3] << 24) | (lp->dev_addr[2] << 16) |

• (lp->dev_addr[1] << 8) | (lp->dev_addr[0] ));
  

• xps_ll_temac_indirect_set(0, UAW0, val);
• val = (lp->dev_addr[5] << 8) | lp->dev_addr[4] ;
• xps_ll_temac_indirect_set(0, UAW1, val);
• return 0;

+}

+static int xps_ll_temac_init(struct eth_device *dev, bd_t *bis) +{

• struct xps_ll_temac_private *lp = (struct xps_ll_temac_private *)dev->priv;

+#ifdef SDMA_MODE

• xps_ll_temac_bd_init();

+#endif +#ifdef FIFO_MODE

• ll_fifo->tdfr = 0x000000a5; /* set fifo lenght */

s/lenght/length/

• ll_fifo->rdfr = 0x000000a5;
• /* ll_fifo->isr = 0x0; */
• /* ll_fifo->ier = 0x0; */

+#endif

• xps_ll_temac_indirect_set(0, MC, MDIO_ENABLE_MASK | MDIO_CLOCK_DIV_100MHz);
• xps_ll_temac_addr_setup(lp);
• xps_ll_temac_indirect_set(0, AFM, 0x00000000); /* Promiscuos mode disable */
• xps_ll_temac_indirect_set(0, RCW1, 0x10000000); /* Enable Receiver */
• xps_ll_temac_indirect_set(0, TC, 0x10000000); /* Enable Transmitter */
• return 0;

+}

+static void xps_ll_temac_halt(void) +{ +#ifdef ETH_HALTING

• xps_ll_temac_indirect_set(0, RCW1, 0x00000000); /* Disable Receiver */
• xps_ll_temac_indirect_set(0, TC, 0x00000000); /* Disable Transmitter */

+#ifdef SDMA_MODE

• out_be32((u32 *)DMA_CONTROL_REG, 0x00000001);
• while(in_be32((u32 *)DMA_CONTROL_REG) & 1);

+#endif +#ifdef FIFO_MODE

• /* reset fifos */

+#endif +#endif +}

+/* halt device */ +static void ll_temac_halt(struct eth_device *dev) +{

• link = 0;
• xps_ll_temac_halt();

+}

+static int ll_temac_init(struct eth_device *dev, bd_t *bis) +{

• static int first = 1;
• struct xps_ll_temac_private *lp;

+#if DEBUG

• int i;

+#endif

• if(!first)

• return 0;
  

• first = 0;
• dev = (struct eth_device *) calloc(1, sizeof(struct eth_device));
• if (NULL == dev)

• return 0;
  

• lp = (struct xps_ll_temac_private *) calloc(1, sizeof(struct xps_ll_temac_private));
• if (lp == NULL)

• return 0;
  

• dev->priv = lp;

priv should be set up in initialize()

• sprintf(dev->name, "eth0");

Name should be set up in initialize()

• xps_ll_temac_init(dev, bis);
• printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n",

• dev->name, 0, XILINX_LLTEMAC_BASEADDR);
  

+#if DEBUG

• for(i = 0;i < 32;i++) {

• read_phy_reg(i);
  

• }

+#endif

• xps_ll_temac_phy_ctrl();
• return 1;

+}

+static int ll_temac_send(struct eth_device *dev, volatile void *packet, int length) +{ +#ifdef SDMA_MODE

• return xps_ll_temac_send_sdma((unsigned char *)packet, length);

+#endif +#ifdef FIFO_MODE

• return xps_ll_temac_send_fifo((unsigned char *)packet, length);

+#endif +}

+static int ll_temac_recv(struct eth_device *dev) +{ +#ifdef SDMA_MODE

• return xps_ll_temac_recv_sdma();

+#endif +#ifdef FIFO_MODE

• return xps_ll_temac_recv_fifo();

+#endif +}

+int xilinx_ll_temac_initialize (bd_t *bis) +{

• struct eth_device *dev;
• dev = malloc(sizeof(*dev));
• if (dev == NULL)

• hang();
  

• memset(dev, 0, sizeof(*dev));
• sprintf(dev->name, "Xilinx LL TEMAC");
• dev->iobase = 0;
• dev->priv = 0;
• dev->init = ll_temac_init;
• dev->halt = ll_temac_halt;
• dev->send = ll_temac_send;
• dev->recv = ll_temac_recv;
• eth_register(dev);
• return 0;

+}

Same comment as the other driver - this only allows a single instance. Please consider encapsulating things like base addresses in the dev struct, then you can have multiple instances.

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 72715f6..89e4bcc 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -232,8 +232,10 @@

#ifndef CONFIG_SYS_ENET #undef CONFIG_CMD_NET

• #undef CONFIG_NET_MULTI

#else #define CONFIG_CMD_PING

• #define CONFIG_NET_MULTI

#endif

#if defined(CONFIG_SYSTEMACE) diff --git a/include/netdev.h b/include/netdev.h index 50329a3..8da0110 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,6 +78,8 @@ int tsi108_eth_initialize(bd_t *bis); int uec_initialize(int index); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); +int xilinx_emaclite_initialize (bd_t *bis); +int xilinx_ll_temac_initialize(bd_t *bis); int sh_eth_initialize(bd_t *bis); int dm9000_initialize(bd_t *bis);

diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c index cfed5fe..8d17b03 100644 --- a/lib_microblaze/board.c +++ b/lib_microblaze/board.c @@ -30,6 +30,7 @@ #include <timestamp.h> #include <version.h> #include <watchdog.h> +#include <net.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -41,10 +42,6 @@ extern int gpio_init (void); #ifdef CONFIG_SYS_INTC_0 extern int interrupts_init (void); #endif -#if defined(CONFIG_CMD_NET) -extern int eth_init (bd_t * bis); -extern int getenv_IPaddr (char *); -#endif

/*

• Begin and End of memory area for malloc(), and current "brk"

@@ -168,14 +165,20 @@ void board_init (void) } #endif

• /* relocate environment function pointers etc. */
• env_relocate ();

#if defined(CONFIG_CMD_NET) /* IP Address */

• bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
• eth_init (bd);

-#endif

• bd->bi_ip_addr = getenv_IPaddr("ipaddr");

• /* relocate environment function pointers etc. */
• env_relocate ();

• printf("Net: ");
• eth_initialize(gd->bd);
• uchar enetaddr[6];
• eth_getenv_enetaddr("ethaddr", enetaddr);
• printf("MAC: %pM\n", enetaddr);

+#endif

/* main_loop */ for (;;) {

regards, Ben