On 25/02/2021 20:34, Ramon Fried wrote:
On Wed, Feb 24, 2021 at 6:31 PM Neil Armstrong narmstrong@baylibre.com wrote:
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with the external PHY or the internal 10/100 PHY.
This adds support for this mux as a MDIO MUX device.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
drivers/net/Kconfig | 7 ++ drivers/net/Makefile | 1 + drivers/net/mdio_mux_meson_g12a.c | 149 ++++++++++++++++++++++++++++++ 3 files changed, 157 insertions(+) create mode 100644 drivers/net/mdio_mux_meson_g12a.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 41fa2fe566..e1d3b26687 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -797,4 +797,11 @@ config MDIO_MUX_MMIOREG This driver is used for MDIO muxes driven by writing to a register in the MMIO physical memory.
+config MDIO_MUX_MESON_G12A
bool "MDIO MUX for Amlogic Meson G12A SoCs"depends on DM_MDIO_MUXhelpThis driver is used for the MDIO mux found on the Amlogic G12A & compatibleSoCs.endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 511c87c3a5..070ae7662c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o +obj-$(CONFIG_MDIO_MUX_MESON_G12A) += mdio_mux_meson_g12a.o obj-$(CONFIG_MDIO_MUX_MMIOREG) += mdio_mux_mmioreg.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o diff --git a/drivers/net/mdio_mux_meson_g12a.c b/drivers/net/mdio_mux_meson_g12a.c new file mode 100644 index 0000000000..b520bf98f0 --- /dev/null +++ b/drivers/net/mdio_mux_meson_g12a.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- (C) Copyright 2021 BayLibre, SAS
- Author: Neil Armstrong narmstrong@baylibre.com
- */
+#include <dm.h> +#include <errno.h> +#include <log.h> +#include <miiphy.h> +#include <asm/io.h> +#include <linux/bitfield.h>
+#define ETH_PLL_STS 0x40 +#define ETH_PLL_CTL0 0x44 +#define PLL_CTL0_LOCK_DIG BIT(30) +#define PLL_CTL0_RST BIT(29) +#define PLL_CTL0_EN BIT(28) +#define PLL_CTL0_SEL BIT(23) +#define PLL_CTL0_N GENMASK(14, 10) +#define PLL_CTL0_M GENMASK(8, 0) +#define PLL_LOCK_TIMEOUT 1000000 +#define PLL_MUX_NUM_PARENT 2 +#define ETH_PLL_CTL1 0x48 +#define ETH_PLL_CTL2 0x4c +#define ETH_PLL_CTL3 0x50 +#define ETH_PLL_CTL4 0x54 +#define ETH_PLL_CTL5 0x58 +#define ETH_PLL_CTL6 0x5c +#define ETH_PLL_CTL7 0x60
+#define ETH_PHY_CNTL0 0x80 +#define EPHY_G12A_ID 0x33010180 +#define ETH_PHY_CNTL1 0x84 +#define PHY_CNTL1_ST_MODE GENMASK(2, 0) +#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3) +#define EPHY_DFLT_ADD 8 +#define PHY_CNTL1_MII_MODE GENMASK(15, 14) +#define EPHY_MODE_RMII 0x1 +#define PHY_CNTL1_CLK_EN BIT(16) +#define PHY_CNTL1_CLKFREQ BIT(17) +#define PHY_CNTL1_PHY_ENB BIT(18) +#define ETH_PHY_CNTL2 0x88 +#define PHY_CNTL2_USE_INTERNAL BIT(5) +#define PHY_CNTL2_SMI_SRC_MAC BIT(6) +#define PHY_CNTL2_RX_CLK_EPHY BIT(9)
+#define MESON_G12A_MDIO_EXTERNAL_ID 0 +#define MESON_G12A_MDIO_INTERNAL_ID 1
+struct mdio_mux_meson_g12a_priv {
struct udevice *chip;phys_addr_t phys;+};
+static int meson_g12a_ephy_pll_init(struct mdio_mux_meson_g12a_priv *priv) +{
/* Fire up the PHY PLL */writel(0x29c0040a, priv->phys + ETH_PLL_CTL0);writel(0x927e0000, priv->phys + ETH_PLL_CTL1);writel(0xac5f49e5, priv->phys + ETH_PLL_CTL2);writel(0x00000000, priv->phys + ETH_PLL_CTL3);writel(0x00000000, priv->phys + ETH_PLL_CTL4);writel(0x20200000, priv->phys + ETH_PLL_CTL5);writel(0x0000c002, priv->phys + ETH_PLL_CTL6);writel(0x00000023, priv->phys + ETH_PLL_CTL7);writel(0x39c0040a, priv->phys + ETH_PLL_CTL0);writel(0x19c0040a, priv->phys + ETH_PLL_CTL0);return 0;+}
+static int meson_g12a_enable_internal_mdio(struct mdio_mux_meson_g12a_priv *priv) +{
/* Initialize ephy control */writel(EPHY_G12A_ID, priv->phys + ETH_PHY_CNTL0);writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |PHY_CNTL1_CLK_EN |PHY_CNTL1_CLKFREQ |PHY_CNTL1_PHY_ENB,priv->phys + ETH_PHY_CNTL1);writel(PHY_CNTL2_USE_INTERNAL |PHY_CNTL2_SMI_SRC_MAC |PHY_CNTL2_RX_CLK_EPHY,priv->phys + ETH_PHY_CNTL2);return 0;+}
+static int meson_g12a_enable_external_mdio(struct mdio_mux_meson_g12a_priv *priv) +{
/* Reset the mdio bus mux */writel(0x0, priv->phys + ETH_PHY_CNTL2);return 0;+}
+static int mdio_mux_meson_g12a_select(struct udevice *mux, int cur, int sel) +{
struct mdio_mux_meson_g12a_priv *priv = dev_get_priv(mux);debug("%s: %x -> %x\n", __func__, (u32)cur, (u32)sel);/* if last selection didn't change we're good to go */if (cur == sel)return 0;switch (sel) {case MESON_G12A_MDIO_EXTERNAL_ID:return meson_g12a_enable_external_mdio(priv);case MESON_G12A_MDIO_INTERNAL_ID:return meson_g12a_enable_internal_mdio(priv);default:return -EINVAL;}return 0;+}
+static const struct mdio_mux_ops mdio_mux_meson_g12a_ops = {
.select = mdio_mux_meson_g12a_select,+};
+static int mdio_mux_meson_g12a_probe(struct udevice *dev) +{
struct mdio_mux_meson_g12a_priv *priv = dev_get_priv(dev);priv->phys = dev_read_addr(dev);meson_g12a_ephy_pll_init(priv);return 0;+}
+static const struct udevice_id mdio_mux_meson_g12a_ids[] = {
{ .compatible = "amlogic,g12a-mdio-mux" },{ }+};
+U_BOOT_DRIVER(mdio_mux_meson_g12a) = {
.name = "mdio_mux_meson_g12a",.id = UCLASS_MDIO_MUX,.of_match = mdio_mux_meson_g12a_ids,.probe = mdio_mux_meson_g12a_probe,.ops = &mdio_mux_meson_g12a_ops,.priv_auto = sizeof(struct mdio_mux_meson_g12a_priv),+};
2.25.1
Reviewed-by: Ramon Fried rfried.dev@gmail.com
Thanks !
Applied to u-boot-amlogic-next