Hello,
I have a Raspberry Pi 3B Plus which I want to integrate with U-boot (v2023.10) .
I am using rpi_3_32b_defconfig to generate u-boot.bin. But while booting I am getting below error
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: No ethernet found. starting USB... Bus usb@7e980000: USB DWC2 scanning bus usb@7e980000 for devices... Error: lan78xx_eth address not set. 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0
In the "bdinfo", "current eth" is not set
U-Boot> bdinfo boot_params = 0x00000100 DRAM bank = 0x00000000 -> start = 0x00000000 -> size = 0x3b400000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 baudrate = 115200 bps relocaddr = 0x3b360000 reloc off = 0x3b358000 Build = 32-bit current eth = unknown eth-1addr = (not set) IP addr = <NULL>
I also enabled LAN75xx in menuconfig and re-compiled u-boot. But still the same error.
However on Raspberry Pi 3B, I don't see this error and "current eth" is set to "smsc95xx_eth" and "ethaddr" is also available.
Can anyone please let me know the issue with Raspberry Pi 3b plus?
Thanks in advance.