[PATCH] ARM: imx: soc: Select default TEXT_BASE for MX7

23 Jun 2020


      ...
Select default U-Boot and SPL text base for the MX7 SoC. The U-Boot
text base is picked as the one used by various MX7 boards. The SPL
text base however is different.
The SPL text base is set to 0x912000 instead of the usual 0x911000,
that is because the 0x911000 value cannot work. Using 0x911000 as a
SPL text base will result in the DCD header being placed below the
0x911000 address, which is a reserved SRAM area which must not be
used. This will actually trigger eMMC boot failure on MX7D at least.
Hence the increment.
Update all boards affected by this SPL problem to the new SPL_TEXT_BASE.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Fabio Estevam festevam@gmail.com
Cc: NXP i.MX U-Boot Team uboot-imx@nxp.com
Cc: Peng Fan peng.fan@nxp.com
Cc: Stefano Babic sbabic@denx.de
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH] ARM: imx: soc: Select default TEXT_BASE for MX7

sbabic＠denx.de