If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to randomize the virtual address at which the kernel image is loaded, it expects entropy to be provided by the bootloader by populating /chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
If we have DM_RNG enabled populate this value automatically when fdt_chosen is called. We skip this if ARMV8_SEC_FIRMWARE_SUPPORT is enabled as its implementation uses a different source of entropy that is not yet implemented as DM_RNG. We also skip this if MEASURED_BOOT is enabled as in that case any modifications to the dt will cause measured boot to fail (although there are many other places the dt is altered).
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for randomization and completely ignores the kaslr-seed for its own randomness needs (i.e the randomization of the physical placement of the kernel). It gets weeded out from the DTB that gets handed over via efi_install_fdt() as it would also mess up the measured boot DTB TPM measurements as well.
Signed-off-by: Tim Harvey tharvey@gateworks.com Reviewed-by: Simon Glass sjg@chromium.org Cc: Michal Simek michal.simek@amd.com Cc: Andy Yan andy.yan@rock-chips.com Cc: Akash Gajjar gajjar04akash@gmail.com Cc: Ilias Apalodimas ilias.apalodimas@linaro.org Cc: Simon Glass sjg@chromium.org Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Devarsh Thakkar devarsht@ti.com Cc: Heinrich Schuchardt xypron.glpk@gmx.de Cc: Hugo Villeneuve hvilleneuve@dimonoff.com Cc: Marek Vasut marex@denx.de Cc: Tom Rini trini@konsulko.com Cc: Chris Morgan macromorgan@hotmail.com --- v6: - collected tags v5: - fixed typo in commit message s/it's/its/ - split patch into 3 parts v4: - add missing /n to notice in kaslrseed cmd - combine ints in declaration - remove unused vars from board/xilinx/common/board.c ft_board_setup v3: - skip if CONFIG_MEASURED_BOOT - fix skip for CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT - pass in rng index and bool to specify overwrite - remove duplicate error strings printed outside of fdt_kaslrseed - added note to commit log about how EFI STUB weeds out kalsr-seed v2: - fix typo in commit msg - use stack for seed to avoid unecessary malloc/free - move to a library function and deduplicate code by using it elsewhere --- boot/fdt_support.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/boot/fdt_support.c b/boot/fdt_support.c index b1b2679dea0c..4559adcd5e2e 100644 --- a/boot/fdt_support.c +++ b/boot/fdt_support.c @@ -345,6 +345,15 @@ int fdt_chosen(void *fdt) if (nodeoffset < 0) return nodeoffset;
+ /* if DM_RNG enabled automatically inject kaslr-seed node unless: + * CONFIG_MEASURED_BOOT enabled: as dt modifications break measured boot + * CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT enabled: as that implementation does not use dm yet + */ + if (IS_ENABLED(CONFIG_DM_RNG) && + !IS_ENABLED(CONFIG_MEASURED_BOOT) && + !IS_ENABLED(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT)) + fdt_kaslrseed(fdt, false); + if (IS_ENABLED(CONFIG_BOARD_RNG_SEED) && !board_rng_seed(&buf)) { err = fdt_setprop(fdt, nodeoffset, "rng-seed", abuf_data(&buf), abuf_size(&buf));