Now that we have FAN53555 support, we can enable the regulators in our DTS. To make these easier to identify on the U-Boot commandline, we rename them to the names of the voltage rails they control.
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---
Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
arch/arm/dts/rk3399-puma.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 11ffcb7..ba9bb4c 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -218,7 +218,8 @@ i2c-scl-falling-time-ns = <4>; clock-frequency = <400000>;
- vdd_gpu: fan535555@60 { + vdd_gpu: vdd_gpu { + status = "okay"; compatible = "fcs,fan53555"; reg = <0x60>; vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; @@ -420,7 +421,8 @@ status = "okay"; clock-frequency = <400000>;
- vdd_cpu_b: fan53555@60 { + vdd_cpu_b: vdd_cpu_b { + status = "okay"; compatible = "fcs,fan53555"; reg = <0x60>; vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;