Adding the nessecary changes for OMAP5430 ES1.0 silicon.
Signed-off-by: R Sricharan r.sricharan@ti.com --- include/configs/omap5_evm.h | 21 ++++++--------------- 1 files changed, 6 insertions(+), 15 deletions(-)
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index d3d5263..0bdfd69 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -49,8 +49,10 @@ #define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */ -#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_OSCK 19200000 /* Clock output from T2 */ #define V_SCLK V_OSCK +#define CONFIG_SYS_CLOCKS_ENABLE_ALL 1 /* Enable all clocks */ +#define CONFIG_SYS_ENABLE_PADS_ALL 1 /* Enable all PADS for now */
#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R @@ -97,10 +99,6 @@ #define CONFIG_DRIVER_OMAP34XX_I2C #define CONFIG_I2C_MULTI_BUS
-/* TWL6030 */ -#define CONFIG_TWL6030_POWER -#define CONFIG_CMD_BAT - /* MMC */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC @@ -112,13 +110,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ #define CONFIG_ENV_OFFSET 0xE0000
-/* USB */ -#define CONFIG_MUSB_UDC -#define CONFIG_USB_OMAP3 - -/* USB device configuration */ -#define CONFIG_USB_DEVICE -#define CONFIG_USB_TTY #define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* Flash */ @@ -154,7 +145,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "mmcdev=0\0" \ @@ -250,8 +241,8 @@
/* Defines for SPL */ #define CONFIG_SPL -#define CONFIG_SPL_TEXT_BASE 0x40304350 -#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */ +#define CONFIG_SPL_TEXT_BASE 0x40300350 +#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */