2 May
2009
2 May
'09
10:20 p.m.
Hello,
Well, the PLLB should be configured correctly by the AT91-bootstrap code (from Atmel).
no this is the case only if you supposed that you use U-Boot as second stage bootloader which is not the case for the PM9263, PM9261 and other boards (9263ek too for norflash boot as example)
In that case the description is wrong. It states:
the USB support for all AT91SAM9261 based boards doesn't work.
Look at the word 'ALL', that mislead me here...
As already agree with Atmel dev, the bootstrap will have to init only what it need to use which is not the case of the USB Host. U-Boot and other binary will have to take care of it's own init.
I can agree with that.
Kind regards,
Remy