[U-Boot-Users] MPC8266ADS

The current configuration in U-BOOT works, and boots Linux with no problem. It will, however, not work on a virgin ADS development board. You have to change one jumper to get the CPU to use the Hardware Configuration word from Flash, and not from BCSR... (JP3 I think).

Can somebody confirm that the latest u-boot-0.4.0 with default settings on all jumpers except for JP3 works correctly. I just downloaded the latest code from CVS and it is not working for me.

Incidentally, u-boot-0.3.0 works on the board with the default jumper settings (including JP3 on 2-3 BCSR) and no code changes right out of the box.

Also, does anybody have a BDI2000 config file for the MPC8266ADS that matches the new configuration from u-boot-0.4.0?