Hi Wolfgang,
On Thursday 23 October 2008, Wolfgang Denk wrote:
In message 200810231251.36841.sr@denx.de you wrote:
Is this a 600MHz Kilauea? This is a known issue, that the new autocalibration
No, this is a CPU Rev. A board at 400 Mhz.
Probably with the same DDR2 frequency.
code has a problem here. I reported this problem a few weeks ago. AMCC is currently working on a fix for this.
Should we not backout the autocalib patches that cause the problem until a stable working solution is found?
Not sure. My hope is that AMCC find a solution quickly. They should receive the failing board this week.
And they already did send a "fix" (more a workaround) for this problem:
[PATCH v2] ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz
which you rejected. So I suggest to wait for a few days.
Victor, Adam, did you already receive my board?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================