Re: [U-Boot] [U-Boot, v3] test/py: only check for SPL signature if SPL uses serial output

On Wed, Feb 17, 2016 at 06:32:51PM +0100, Heiko Schocher wrote:

check for U-Boot SPL signature only if SPL really has a serial output. So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config.

Signed-off-by: Heiko Schocher hs@denx.de Tested-by: Stephen Warren swarren@nvidia.com Reviewed-by: Stephen Warren swarren@nvidia.com

Applied to u-boot/master, thanks!