29 Jun
2009
29 Jun
'09
9:45 p.m.
Matt,
What are the settings for SW1[5] and SW1[6]? Should be SW1[5]-on and SW1[6]-off. After programmed the Intel flash from Atmel flash, did you flip the switch boot from Intel flash (SW1[3]-off)? Is your network 100Tbase or 10Tbase?
If you able to perform the same task in Atmel boot, you should be able to do the same in Intel boot.
No. There is no known hw issue for this problem.
Best Regards, TsiChung