On Thu, 2012-01-26 at 10:08 -0700, Tom Rini wrote:
On Wed, Jan 25, 2012 at 1:06 PM, wilsonjonathan piercing_male@hotmail.com wrote:
The u-boot loader is showing an incorrect size in the memory, and passing the invalid information to the kernel.
What revision of the board do you have? Is this a 'classic' rev C4? Thanks.
Using the denx u-boot, if it doesn't find u-boot.img it halts instead of then testing for u-boot.bin... so I put u-boot.img onto the mmc and the following came up.
U-Boot SPL 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img
U-Boot 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 1 GiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Beagle Rev C4 timed out in wait_for_pin: I2C_STAT=0 I2C read: I/O error Unrecognized expansion board: 0 Die ID #5468002400000000040365fa12014003 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 OMAP3 beagleboard.org #