There are two kinds of expansion boards which are often used for the UniPhier platform and they are only exclusively selectable. It can be better described by the "choice" menu of Kconfig.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
arch/arm/cpu/armv7/uniphier/Kconfig | 23 +++++++++++++++++++++++ configs/ph1_ld4_defconfig | 1 + configs/ph1_pro4_defconfig | 1 + configs/ph1_sld8_defconfig | 1 + include/configs/ph1_ld4.h | 15 --------------- include/configs/ph1_pro4.h | 15 --------------- include/configs/ph1_sld8.h | 15 --------------- include/configs/uniphier-common.h | 6 ------ 8 files changed, 26 insertions(+), 51 deletions(-)
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 31a03d9..1d96db2 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -27,6 +27,29 @@ config MACH_PH1_SLD8
endchoice
+choice + prompt "UniPhier Support Card select" + optional + +config PFC_MICRO_SUPPORT_CARD + bool "Support card with PFC CPLD" + help + This option provides support for the expansion board with PFC + original address mapping. + + Say Y to use the on-board UART, Ether, LED devices. + +config DCC_MICRO_SUPPORT_CARD + bool "Support card with DCC CPLD" + help + This option provides support for the expansion board with DCC- + arranged address mapping that is compatible with legacy UniPhier + reference boards. + + Say Y to use the on-board UART, Ether, LED devices. + +endchoice + config CMD_PINMON bool "Enable boot mode pins monitor command" depends on !SPL_BUILD diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index de068e9..3155340 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_LD4=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BDI=y CONFIG_CMD_CONSOLE=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index f4ddf5f..7ea4e6e 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_PRO4=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BDI=y CONFIG_CMD_CONSOLE=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index ee14382..ddf210c 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_SLD8=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BDI=y CONFIG_CMD_CONSOLE=y diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h index 73a95e6..a3e4f96 100644 --- a/include/configs/ph1_ld4.h +++ b/include/configs/ph1_ld4.h @@ -9,21 +9,6 @@ #define __PH1_XXX_H
/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* * Serial Configuration * SoC UART : enable CONFIG_UNIPHIER_SERIAL * On-board UART: enable CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h index 7780030..15849ba 100644 --- a/include/configs/ph1_pro4.h +++ b/include/configs/ph1_pro4.h @@ -9,21 +9,6 @@ #define __PH1_XXX_H
/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* * Serial Configuration * SoC UART : enable CONFIG_UNIPHIER_SERIAL * On-board UART: enable CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h index e2f1102..e64d902 100644 --- a/include/configs/ph1_sld8.h +++ b/include/configs/ph1_sld8.h @@ -9,21 +9,6 @@ #define __PH1_XXX_H
/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* * Serial Configuration * SoC UART : enable CONFIG_UNIPHIER_SERIAL * On-board UART: enable CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index 31ab470..224c335 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -10,12 +10,6 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ -are defined. Select only one of them." -#endif - /* * Support card address map */