On Monday 02 March 2009, Felix Radensky wrote:
Also, I've compared the values of SDR0_SDSTP0-SDR0_SDSTP3 registers in bootstrap options C and H and didn't find anything suspicious. There are differences in various divisor values, but that is expected. Tested with u-boot 2009.03-rc1 and linux-2.6.29-rc5
It is even more simple. It's enough to power up the board and run "reset" in u-boot, to make u-boot recognize the card when it comes up.
Did you already try setting the "pciscandelay" env variable? Set it to 5 for 5 seconds delay before PnP scanning.
Does this help?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================