Hi,
On 06/03/18 21:38, Tuomas Tynkkynen wrote:
In README.sunxi64 we tell the user how to optionally create u-boot-sunxi-with-spl.bin by manually running cat. Instead, have the build system create the file automatically just like it does for 32-bit sunxi boards.
Signed-off-by: Tuomas Tynkkynen tuomas@tuxera.com
Reviewed-by: Andre Przywara andre.przywara@arm.com
Cheers, Andre.
Makefile | 5 +++++ board/sunxi/README.sunxi64 | 3 +-- 2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile index 24a79446d8..4b203a0155 100644 --- a/Makefile +++ b/Makefile @@ -1191,8 +1191,13 @@ u-boot-x86-16bit.bin: u-boot FORCE endif
ifneq ($(CONFIG_ARCH_SUNXI),) +ifeq ($(CONFIG_ARM64),) u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE $(call if_changed,binman) +else +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
- $(call if_changed,cat)
+endif endif
ifneq ($(CONFIG_TEGRA),) diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 index c492f749b8..5a363d27b8 100644 --- a/board/sunxi/README.sunxi64 +++ b/board/sunxi/README.sunxi64 @@ -95,9 +95,8 @@ Transfer the SPL and the U-Boot FIT image directly to an uSD card: (replace /dev/sdx with you SD card device file name, which could be /dev/mmcblk[x] as well).
-Alternatively you can concatenate the SPL and the U-Boot FIT image into a +Alternatively you can use the SPL and the U-Boot FIT image combined into a single file and transfer that instead: -$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin # dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1
You can partition the microSD card, but leave the first MB unallocated (most