Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham judge.packham@gmail.com ---
arch/arm/dts/kirkwood-d2net.dts | 45 +++++ arch/arm/dts/kirkwood-net2big.dts | 63 +++++++ arch/arm/dts/kirkwood-netxbig.dtsi | 232 ++++++++++++++++++++++++ configs/d2net_v2_defconfig | 3 +- configs/net2big_v2_defconfig | 3 +- include/dt-bindings/leds/leds-netxbig.h | 18 ++ 6 files changed, 362 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/kirkwood-d2net.dts create mode 100644 arch/arm/dts/kirkwood-net2big.dts create mode 100644 arch/arm/dts/kirkwood-netxbig.dtsi create mode 100644 include/dt-bindings/leds/leds-netxbig.h
diff --git a/arch/arm/dts/kirkwood-d2net.dts b/arch/arm/dts/kirkwood-d2net.dts new file mode 100644 index 000000000000..bd3b266dd766 --- /dev/null +++ b/arch/arm/dts/kirkwood-d2net.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for d2 Network v2 + * + * Copyright (C) 2014 Simon Guinot simon.guinot@sequanux.org + * +*/ + +/dts-v1/; + +#include <dt-bindings/leds/leds-ns2.h> +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie d2 Network v2"; + compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "d2net_v2:blue:sata"; + slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "d2net_v2:red:fail"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/dts/kirkwood-net2big.dts b/arch/arm/dts/kirkwood-net2big.dts new file mode 100644 index 000000000000..3e3ac289e5b0 --- /dev/null +++ b/arch/arm/dts/kirkwood-net2big.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for LaCie 2Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn andrew@lunn.ch + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot sguinot@lacie.com + * +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big Network v2"; + compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + fan { + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; +}; + +®ulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&i2c0 { + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; diff --git a/arch/arm/dts/kirkwood-netxbig.dtsi b/arch/arm/dts/kirkwood-netxbig.dtsi new file mode 100644 index 000000000000..135ac8021c8c --- /dev/null +++ b/arch/arm/dts/kirkwood-netxbig.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree common file for LaCie 2Big and 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn andrew@lunn.ch + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot sguinot@lacie.com + * +*/ + +#include <dt-bindings/leds/leds-netxbig.h> +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + serial@12000 { + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor", "spi-flash"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * esc and power represent a three position rocker + * switch. Thus the conventional KEY_POWER does not fit + */ + exc { + label = "Back power switch (on|auto)"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + power { + label = "Back power switch (auto|off)"; + linux,code = <KEY_1>; + linux,input-type = <5>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + option { + label = "Function button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "hdd0power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; + + netxbig_gpio_ext: netxbig-gpio-ext { + compatible = "lacie,netxbig-gpio-ext"; + + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH + &gpio1 16 GPIO_ACTIVE_HIGH + &gpio1 17 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + &gpio1 14 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = <&netxbig_gpio_ext>; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <8>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_button_function: pmx-button-function { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_button_power_off: pmx-button-power-off { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_button_power_on: pmx-button-power-on { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index 72db1e74a0aa..d054c21780c3 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_NET2BIG_V2=y CONFIG_IDENT_STRING=" D2 v2" +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net" CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -26,6 +27,7 @@ CONFIG_CMD_FAT=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set @@ -39,4 +41,3 @@ CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index d486e4cd7bd2..e7216556be92 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_NET2BIG_V2=y CONFIG_IDENT_STRING=" 2Big v2" +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big" CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -26,6 +27,7 @@ CONFIG_CMD_FAT=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set @@ -39,4 +41,3 @@ CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/include/dt-bindings/leds/leds-netxbig.h b/include/dt-bindings/leds/leds-netxbig.h new file mode 100644 index 000000000000..92658b0310b2 --- /dev/null +++ b/include/dt-bindings/leds/leds-netxbig.h @@ -0,0 +1,18 @@ +/* + * This header provides constants for netxbig LED bindings. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _DT_BINDINGS_LEDS_NETXBIG_H +#define _DT_BINDINGS_LEDS_NETXBIG_H + +#define NETXBIG_LED_OFF 0 +#define NETXBIG_LED_ON 1 +#define NETXBIG_LED_SATA 2 +#define NETXBIG_LED_TIMER1 3 +#define NETXBIG_LED_TIMER2 4 + +#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */