Hi; I have ITE PCI IDE plugin card on my PQ2FADS-ZU and there is a device timeout when u-boot boots and try to read from the IDE drive. Any insight is appreciated.
<whole bunch of ide_inb debug messages...> .ide_inb (dev= 0, port= 0x1c) : @ 0x8400001c -> 0x84 ** Timeout ** Hit any key to stop autoboot: 0 ## Booting image at fff80000 ... Bad Magic Number u-boot> printenv bootargs=root=/dev/mtdblock2 bootcmd=bootm fff80000 bootdelay=10 baudrate=115200 ethaddr=08:00:3E:33:44:56 ipaddr=147.128.28.44 serverip=147.128.28.42 gatewayip=147.128.28.1 netmask=255.255.254.0 hostname=PQ2FADS-ZU stdin=serial stdout=serial stderr=serial ethact=FCC2 ETHERNET
Environment size: 278/262140 bytes u-boot> ide Usage: ide - IDE sub-system u-boot> ? ide ide reset - reset IDE controller ide info - show available IDE devices ide device [dev] - show or set current device ide part [dev] - print partition table of one or all IDE devices ide read addr blk# cnt ide write addr blk# cnt - read/write `cnt' blocks starting at block `blk#' to/from memory address `addr'
u-boot> ide info
u-boot> ide device
no IDE devices available u-boot> pci Scanning PCI devices on bus 0 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x1057 0x18c0 Bridge device 0x00 00.16.00 0x1283 0x8212 Mass storage controller 0x04 u-boot> ide device 0
IDE device 0: not available u-boot>
Regards, TEH