This file (from Linux 3.17) provides defines for display port. Use it so that our naming is consistent with Linux.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v6: None Changes in v4: None Changes in v3: None Changes in v2: None
include/linux/drm_dp_helper.h | 405 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 405 insertions(+) create mode 100644 include/linux/drm_dp_helper.h
diff --git a/include/linux/drm_dp_helper.h b/include/linux/drm_dp_helper.h new file mode 100644 index 0000000..86b06e1 --- /dev/null +++ b/include/linux/drm_dp_helper.h @@ -0,0 +1,405 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +/* + * Unless otherwise noted, all values are from the DP 1.1a spec. Note that + * DP and DPCD versions are independent. Differences from 1.0 are not noted, + * 1.0 devices basically don't exist in the wild. + * + * Abbreviations, in chronological order: + * + * eDP: Embedded DisplayPort version 1 + * DPI: DisplayPort Interoperability Guideline v1.1a + * 1.2: DisplayPort 1.2 + * MST: Multistream Transport - part of DP 1.2a + * + * 1.2 formally includes both eDP and DPI definitions. + */ + +#define DP_AUX_I2C_WRITE 0x0 +#define DP_AUX_I2C_READ 0x1 +#define DP_AUX_I2C_STATUS 0x2 +#define DP_AUX_I2C_MOT 0x4 +#define DP_AUX_NATIVE_WRITE 0x8 +#define DP_AUX_NATIVE_READ 0x9 + +#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0) +#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0) +#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0) +#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0) + +#define DP_AUX_I2C_REPLY_ACK (0x0 << 2) +#define DP_AUX_I2C_REPLY_NACK (0x1 << 2) +#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2) +#define DP_AUX_I2C_REPLY_MASK (0x3 << 2) + +/* AUX CH addresses */ +/* DPCD */ +#define DP_DPCD_REV 0x000 + +#define DP_MAX_LINK_RATE 0x001 + +#define DP_MAX_LANE_COUNT 0x002 +# define DP_MAX_LANE_COUNT_MASK 0x1f +# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */ +# define DP_ENHANCED_FRAME_CAP (1 << 7) + +#define DP_MAX_DOWNSPREAD 0x003 +# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) + +#define DP_NORP 0x004 + +#define DP_DOWNSTREAMPORT_PRESENT 0x005 +# define DP_DWN_STRM_PORT_PRESENT (1 << 0) +# define DP_DWN_STRM_PORT_TYPE_MASK 0x06 +# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1) +# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1) +# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1) +# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1) +# define DP_FORMAT_CONVERSION (1 << 3) +# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */ + +#define DP_MAIN_LINK_CHANNEL_CODING 0x006 + +#define DP_DOWN_STREAM_PORT_COUNT 0x007 +# define DP_PORT_COUNT_MASK 0x0f +# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ +# define DP_OUI_SUPPORT (1 << 7) + +#define DP_I2C_SPEED_CAP 0x00c /* DPI */ +# define DP_I2C_SPEED_1K 0x01 +# define DP_I2C_SPEED_5K 0x02 +# define DP_I2C_SPEED_10K 0x04 +# define DP_I2C_SPEED_100K 0x08 +# define DP_I2C_SPEED_400K 0x10 +# define DP_I2C_SPEED_1M 0x20 + +#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ + +/* Multiple stream transport */ +#define DP_FAUX_CAP 0x020 /* 1.2 */ +# define DP_FAUX_CAP_1 (1 << 0) + +#define DP_MSTM_CAP 0x021 /* 1.2 */ +# define DP_MST_CAP (1 << 0) + +#define DP_GUID 0x030 /* 1.2 */ + +#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ +# define DP_PSR_IS_SUPPORTED 1 +#define DP_PSR_CAPS 0x071 /* XXX 1.2? */ +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 + +/* + * 0x80-0x8f describe downstream port capabilities, but there are two layouts + * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, + * each port's descriptor is one byte wide. If it was set, each port's is + * four bytes wide, starting with the one byte from the base info. As of + * DP interop v1.1a only VGA defines additional detail. + */ + +/* offset 0 */ +#define DP_DOWNSTREAM_PORT_0 0x80 +# define DP_DS_PORT_TYPE_MASK (7 << 0) +# define DP_DS_PORT_TYPE_DP 0 +# define DP_DS_PORT_TYPE_VGA 1 +# define DP_DS_PORT_TYPE_DVI 2 +# define DP_DS_PORT_TYPE_HDMI 3 +# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_HPD (1 << 3) +/* offset 1 for VGA is maximum megapixels per second / 8 */ +/* offset 2 */ +# define DP_DS_VGA_MAX_BPC_MASK (3 << 0) +# define DP_DS_VGA_8BPC 0 +# define DP_DS_VGA_10BPC 1 +# define DP_DS_VGA_12BPC 2 +# define DP_DS_VGA_16BPC 3 + +/* link configuration */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a +# define DP_LINK_BW_5_4 0x14 /* 1.2 */ + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_3 3 /* 1.2 */ +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */ + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */ +/* bitmask as for DP_I2C_SPEED_CAP */ + +#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ + +#define DP_MSTM_CTRL 0x111 /* 1.2 */ +# define DP_MST_EN (1 << 0) +# define DP_UP_REQ_EN (1 << 1) +# define DP_UPSTREAM_IS_SRC (1 << 2) + +#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ +# define DP_PSR_ENABLE (1 << 0) +# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) +# define DP_PSR_CRC_VERIFICATION (1 << 2) +# define DP_PSR_FRAME_CAPTURE (1 << 3) + +#define DP_ADAPTER_CTRL 0x1a0 +# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) + +#define DP_BRANCH_DEVICE_CTRL 0x1a1 +# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) + +#define DP_PAYLOAD_ALLOCATE_SET 0x1c0 +#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 +#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2 + +#define DP_SINK_COUNT 0x200 +/* prior to 1.2 bit 7 was reserved mbz */ +# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f)) +# define DP_SINK_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 +# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) +# define DP_AUTOMATED_TEST_REQUEST (1 << 1) +# define DP_CP_IRQ (1 << 2) +# define DP_MCCS_IRQ (1 << 3) +# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */ +# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */ +# define DP_SINK_SPECIFIC_IRQ (1 << 6) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ + DP_LANE_CHANNEL_EQ_DONE | \ + DP_LANE_SYMBOL_LOCKED) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +#define DP_TEST_REQUEST 0x218 +# define DP_TEST_LINK_TRAINING (1 << 0) +# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1) +# define DP_TEST_LINK_EDID_READ (1 << 2) +# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ +# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */ + +#define DP_TEST_LINK_RATE 0x219 +# define DP_LINK_RATE_162 (0x6) +# define DP_LINK_RATE_27 (0xa) + +#define DP_TEST_LANE_COUNT 0x220 + +#define DP_TEST_PATTERN 0x221 + +#define DP_TEST_CRC_R_CR 0x240 +#define DP_TEST_CRC_G_Y 0x242 +#define DP_TEST_CRC_B_CB 0x244 + +#define DP_TEST_SINK_MISC 0x246 +#define DP_TEST_CRC_SUPPORTED (1 << 5) + +#define DP_TEST_RESPONSE 0x260 +# define DP_TEST_ACK (1 << 0) +# define DP_TEST_NAK (1 << 1) +# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +#define DP_TEST_EDID_CHECKSUM 0x261 + +#define DP_TEST_SINK 0x270 +#define DP_TEST_SINK_START (1 << 0) + +#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ +# define DP_PAYLOAD_TABLE_UPDATED (1 << 0) +# define DP_PAYLOAD_ACT_HANDLED (1 << 1) + +#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */ +/* up to ID_SLOT_63 at 0x2ff */ + +#define DP_SOURCE_OUI 0x300 +#define DP_SINK_OUI 0x400 +#define DP_BRANCH_OUI 0x500 + +#define DP_SET_POWER 0x600 +# define DP_SET_POWER_D0 0x1 +# define DP_SET_POWER_D3 0x2 +# define DP_SET_POWER_MASK 0x3 + +#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */ + +#define DP_SINK_COUNT_ESI 0x2002 /* 1.2 */ +/* 0-5 sink count */ +# define DP_SINK_COUNT_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */ + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ + +#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ + +#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) + +#define DP_PSR_ESI 0x2007 /* XXX 1.2? */ +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */ +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + +/* DP 1.2 Sideband message defines */ +/* peer device type - DP 1.2a Table 2-92 */ +#define DP_PEER_DEVICE_NONE 0x0 +#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1 +#define DP_PEER_DEVICE_MST_BRANCHING 0x2 +#define DP_PEER_DEVICE_SST_SINK 0x3 +#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 + +/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ +#define DP_LINK_ADDRESS 0x01 +#define DP_CONNECTION_STATUS_NOTIFY 0x02 +#define DP_ENUM_PATH_RESOURCES 0x10 +#define DP_ALLOCATE_PAYLOAD 0x11 +#define DP_QUERY_PAYLOAD 0x12 +#define DP_RESOURCE_STATUS_NOTIFY 0x13 +#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14 +#define DP_REMOTE_DPCD_READ 0x20 +#define DP_REMOTE_DPCD_WRITE 0x21 +#define DP_REMOTE_I2C_READ 0x22 +#define DP_REMOTE_I2C_WRITE 0x23 +#define DP_POWER_UP_PHY 0x24 +#define DP_POWER_DOWN_PHY 0x25 +#define DP_SINK_EVENT_NOTIFY 0x30 +#define DP_QUERY_STREAM_ENC_STATUS 0x38 + +/* DP 1.2 MST sideband nak reasons - table 2.84 */ +#define DP_NAK_WRITE_FAILURE 0x01 +#define DP_NAK_INVALID_READ 0x02 +#define DP_NAK_CRC_FAILURE 0x03 +#define DP_NAK_BAD_PARAM 0x04 +#define DP_NAK_DEFER 0x05 +#define DP_NAK_LINK_FAILURE 0x06 +#define DP_NAK_NO_RESOURCES 0x07 +#define DP_NAK_DPCD_FAIL 0x08 +#define DP_NAK_I2C_NAK 0x09 +#define DP_NAK_ALLOCATE_FAIL 0x0a + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +/* Rest of file omitted as it is not used in U-Boot */ + +#endif /* _DRM_DP_HELPER_H_ */