From: Jagan Teki jagan@amarulasolutions.com
Enable DM_ETH for dt supported sabresd config boards: - imx6q_sabresd_defconfig - imx6qp_sabresd_defconfig
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- board/freescale/mx6sabresd/mx6sabresd.c | 6 ++++++ configs/imx6qdl_sabresd_spl_defconfig | 1 + 2 files changed, 7 insertions(+)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index ac2cabc..3f73b9b 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -70,6 +70,7 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), };
+#ifndef CONFIG_OF_CONTROL static iomux_v3_cfg_t const enet_pads[] = { MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -100,6 +101,7 @@ static void setup_iomux_enet(void) gpio_set_value(IMX_GPIO_NR(1, 25), 1); udelay(100); } +#endif
static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -222,6 +224,7 @@ static void setup_spi(void) imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); }
+#ifndef CONFIG_OF_CONTROL iomux_v3_cfg_t const pcie_pads[] = { MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), /* POWER */ MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), /* RESET */ @@ -231,6 +234,7 @@ static void setup_pcie(void) { imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); } +#endif
iomux_v3_cfg_t const di0_pads[] = { MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* DISP0_CLK */ @@ -507,6 +511,7 @@ int overwrite_console(void) return 1; }
+#ifndef CONFIG_OF_CONTROL int board_eth_init(bd_t *bis) { setup_iomux_enet(); @@ -514,6 +519,7 @@ int board_eth_init(bd_t *bis)
return cpu_eth_init(bis); } +#endif
#if defined(CONFIG_USB_EHCI_MX6) && !defined(CONFIG_DM_USB) #define USB_OTHERREGS_OFFSET 0x800 diff --git a/configs/imx6qdl_sabresd_spl_defconfig b/configs/imx6qdl_sabresd_spl_defconfig index ec77587..46f9619 100644 --- a/configs/imx6qdl_sabresd_spl_defconfig +++ b/configs/imx6qdl_sabresd_spl_defconfig @@ -56,6 +56,7 @@ CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_OF_LIBFDT=y CONFIG_OF_CONTROL=y +CONFIG_DM_ETH=y CONFIG_DM_I2C=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y