So we don't need to duplicate settings from the device tree in the board file.
Signed-off-by: Soeren Moch smoch@web.de --- Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de --- board/tbs/tbs2910/tbs2910.c | 57 ------------------------------------- configs/tbs2910_defconfig | 6 +++- include/configs/tbs2910.h | 17 ----------- 3 files changed, 5 insertions(+), 75 deletions(-)
diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index 20c93778e1..2445efbde2 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -9,7 +9,6 @@ #include <asm/arch/mx6-pins.h> #include <linux/errno.h> #include <asm/gpio.h> -#include <asm/mach-imx/mxc_i2c.h> #include <asm/mach-imx/iomux-v3.h> #include <asm/mach-imx/sata.h> #include <asm/mach-imx/boot_mode.h> @@ -22,7 +21,6 @@ #include <asm/arch/crm_regs.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> -#include <i2c.h> DECLARE_GLOBAL_DATA_PTR;
#define WEAK_PULLUP (PAD_CTL_PUS_47K_UP | \ @@ -40,56 +38,6 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) - -#ifdef CONFIG_SYS_I2C -/* I2C1, SGTL5000 */ -static struct i2c_pads_info i2c_pad_info0 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -/* I2C2 HDMI */ -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -/* I2C3, CON11, DS1307, PCIe_SMB */ -static struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD, - .gp = IMX_GPIO_NR(1, 6) - } -}; -#endif /* CONFIG_SYS_I2C */ - static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), @@ -426,11 +374,6 @@ int board_init(void) #ifdef CONFIG_VIDEO_IPUV3 setup_display(); #endif -#ifdef CONFIG_SYS_I2C - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); -#endif #ifdef CONFIG_DWC_AHSATA setup_sata(); #endif diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 395275c6dd..153f61d09d 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y @@ -43,6 +42,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y CONFIG_DM_KEYBOARD=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y @@ -50,6 +51,8 @@ CONFIG_MII=y CONFIG_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y @@ -62,5 +65,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_I2C_EDID=y CONFIG_VIDEO=y # CONFIG_EFI_LOADER is not set diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 93f75d72f3..eff93eff4f 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -97,23 +97,6 @@ #endif /* CONFIG_USB_KEYBOARD */ #endif /* CONFIG_CMD_USB */
-/* RTC */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#endif - -/* I2C */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_I2C_EDID -#endif - /* Environment organization */ #define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */ #define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */ -- 2.17.1