This adds hardware tripping at 110 degrees celsius which must enable forced system shutdown in case TMU fails to power off.
Signed-off-by: Akshay Saraswat akshay.s@samsung.com Acked-by: Simon Glass sjg@chromium.org --- Changes since v10: - None.
arch/arm/cpu/armv7/exynos/power.c | 12 ++++++++++++ arch/arm/include/asm/arch-exynos/power.h | 4 ++++ drivers/power/exynos-tmu.c | 25 ++++++++++++++++++++----- 3 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 400c8bc..363c20a 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -111,3 +111,15 @@ void set_ps_hold_ctrl(void) if (cpu_is_exynos5()) exynos5_set_ps_hold_ctrl(); } + +/* Enables hardware tripping to power off the system when TMU fails */ +void set_hw_thermal_trip(void) +{ + if (cpu_is_exynos5()) { + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + /* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/ + setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP); + } +} diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index f2f73fa..e409b24 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -857,6 +857,9 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
void set_usbhost_phy_ctrl(unsigned int enable);
+/* Enables hardware tripping to power off the system when TMU fails */ +void set_hw_thermal_trip(void); + #define POWER_USB_HOST_PHY_CTRL_EN (1 << 0) #define POWER_USB_HOST_PHY_CTRL_DISABLE (0 << 0)
@@ -865,6 +868,7 @@ void set_dp_phy_ctrl(unsigned int enable); #define EXYNOS_DP_PHY_ENABLE (1 << 0)
#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) +#define POWER_ENABLE_HW_TRIP (1UL << 31)
/* * Set ps_hold data driving value high diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c index cc5ffee..f4fa9e1 100644 --- a/drivers/power/exynos-tmu.c +++ b/drivers/power/exynos-tmu.c @@ -22,9 +22,11 @@ #include <fdtdec.h> #include <tmu.h> #include <asm/arch/tmu.h> +#include <asm/arch/power.h>
#define TRIMINFO_RELOAD 1 #define CORE_EN 1 +#define THERM_TRIP_EN (1 << 12)
#define INTEN_RISE0 1 #define INTEN_RISE1 (1 << 4) @@ -55,6 +57,8 @@ struct temperature_params { unsigned int start_warning; /* temperature threshold CPU tripping */ unsigned int start_tripping; + /* temperature threshold for HW tripping */ + unsigned int hardware_tripping; };
/* Pre-defined values and thresholds for calibration of current temperature */ @@ -196,6 +200,9 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) info->data.ts.start_tripping = fdtdec_get_int(blob, node, "samsung,start-tripping", -1); error |= info->data.ts.start_tripping; + info->data.ts.hardware_tripping = fdtdec_get_int(blob, + node, "samsung,hw-tripping", -1); + error |= info->data.ts.hardware_tripping; info->data.efuse_min_value = fdtdec_get_int(blob, node, "samsung,efuse-min-value", -1); error |= info->data.efuse_min_value; @@ -230,7 +237,7 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) static void tmu_setup_parameters(struct tmu_info *info) { unsigned int te_code, con; - unsigned int warning_code, trip_code; + unsigned int warning_code, trip_code, hwtrip_code; unsigned int cooling_temp; unsigned int rising_value; struct tmu_data *data = &info->data; @@ -254,9 +261,14 @@ static void tmu_setup_parameters(struct tmu_info *info) + info->te1 - info->dc_value; trip_code = data->ts.start_tripping + info->te1 - info->dc_value; + hwtrip_code = data->ts.hardware_tripping + + info->te1 - info->dc_value; + cooling_temp = 0;
- rising_value = ((warning_code << 8) | (trip_code << 16)); + rising_value = ((warning_code << 8) | + (trip_code << 16) | + (hwtrip_code << 24));
/* Set interrupt level */ writel(rising_value, ®->threshold_temp_rise); @@ -276,12 +288,15 @@ static void tmu_setup_parameters(struct tmu_info *info)
/* TMU core enable */ con = readl(®->tmu_control); - con |= CORE_EN; + con |= THERM_TRIP_EN | CORE_EN;
writel(con, ®->tmu_control);
- /* LEV0 LEV1 LEV2 interrupt enable */ - writel(INTEN_RISE0 | INTEN_RISE1 | INTEN_RISE2, ®->inten); + /* Enable HW thermal trip */ + set_hw_thermal_trip(); + + /* LEV1 LEV2 interrupt enable */ + writel(INTEN_RISE1 | INTEN_RISE2, ®->inten); }
/*