This covers only non-L2 switch ethernet interfaces i.e. RGMII and SGMII interface for both -T1040RDB -T1042RDB_PI
T1040RDB is configured as serdes protocol 0x66 which can support following interfaces -2 RGMIIS on DTSEC4, DTSEC5 -1 SGMII on DTSEC3
T1042RDB_PI is configured as serdes protocol 0x06 which can support following interfaces -2 RGMIIS on DTSEC4, DTSEC5
Signed-off-by: Poonam Aggrwal poonam.aggrwal@freescale.com Signed-off-by: Priyanka Jain Priyanka.Jain@freescale.com --- Changes for v2: Initialized phy_addr to remove compilation warning.
board/freescale/t104xrdb/Makefile | 1 + board/freescale/t104xrdb/eth.c | 72 +++++++++++++++++++++++++++++++++++++ include/configs/T1040RDB.h | 9 ++--- include/configs/T1042RDB_PI.h | 5 ++- 4 files changed, 81 insertions(+), 6 deletions(-) create mode 100644 board/freescale/t104xrdb/eth.c
diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 76c0c94..e51fb7a 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -7,6 +7,7 @@
obj-y += t104xrdb.o obj-y += ddr.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c new file mode 100644 index 0000000..448434b --- /dev/null +++ b/board/freescale/t104xrdb/eth.c @@ -0,0 +1,72 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + int phy_addr = 0; + printf("Initializing Fman\n"); + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* + * Program on board RGMII, SGMII PHY addresses. + */ + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { +#ifdef CONFIG_T1040RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1040RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); +#endif + case PHY_INTERFACE_MODE_RGMII: + if (FM1_DTSEC4 == i) + phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + if (FM1_DTSEC5 == i) + phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; + case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_phy_address(i, 0); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 8784eac..de2df51 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -547,13 +547,12 @@ #endif
#ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
#define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index cd18de5..c5c9a23 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -553,8 +553,11 @@ #endif
#ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif