Bootlog: U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21) mci: setting clock 258000 Hz, block size 512 mci: setting clock 258000 Hz, block size 512 mci: setting clock 258000 Hz, block size 512 mci: setting clock 33024000 Hz, block size 512 reading u-boot.img reading u-boot.img
U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000)
CPU: AT91SAM9G45 Crystal frequency: 12 MHz CPU clock : 400 MHz Master clock : 133.333 MHz Watchdog enabled DRAM: 256 MiB WARNING: Caches not enabled MMC: mci: 0 mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 mci: setting clock 33333333 Hz, block size 512 reading uboot.env In: serial Out: serial Err: serial Net: macb0 Error: macb0 address not set.
Hit any key to stop autoboot: 0 U-Boot>
Signed-off-by: Erik van Luijk evanluijk@interact.nl ---
Changes in v2: - Enable watchdog - Fix typo in lcd_show_board_info()
arch/arm/include/asm/mach-types.h | 1 + arch/arm/mach-at91/Kconfig | 6 + board/mini-box/picosam9g45/Kconfig | 12 ++ board/mini-box/picosam9g45/MAINTAINERS | 6 + board/mini-box/picosam9g45/Makefile | 19 ++ board/mini-box/picosam9g45/led.c | 25 +++ board/mini-box/picosam9g45/picosam9g45.c | 354 +++++++++++++++++++++++++++++++ configs/picosam9g45_defconfig | 12 ++ include/configs/picosam9g45.h | 211 ++++++++++++++++++ 9 files changed, 646 insertions(+) create mode 100644 board/mini-box/picosam9g45/Kconfig create mode 100644 board/mini-box/picosam9g45/MAINTAINERS create mode 100644 board/mini-box/picosam9g45/Makefile create mode 100644 board/mini-box/picosam9g45/led.c create mode 100644 board/mini-box/picosam9g45/picosam9g45.c create mode 100644 configs/picosam9g45_defconfig create mode 100644 include/configs/picosam9g45.h
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 5afe791..912cb90 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -1104,6 +1104,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_UBISYS_P9D_EVP 3493 #define MACH_TYPE_ATDGP318 3494 #define MACH_TYPE_OMAP5_SEVM 3777 +#define MACH_TYPE_PICOSAM9G45 3838 #define MACH_TYPE_ARMADILLO_800EVA 3863 #define MACH_TYPE_KZM9G 4140 #define MACH_TYPE_COLIBRI_T30 4493 diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index bbf4228..423be56 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -64,6 +64,11 @@ config TARGET_PM9G45 bool "Ronetix pm9g45 board" select CPU_ARM926EJS
+config TARGET_PICOSAM9G45 + bool "Mini-box picosam9g45 board" + select CPU_ARM926EJS + select SUPPORT_SPL + config TARGET_AT91SAM9N12EK bool "Atmel AT91SAM9N12-EK board" select CPU_ARM926EJS @@ -150,6 +155,7 @@ source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" source "board/esd/otc570/Kconfig" source "board/eukrea/cpu9260/Kconfig" +source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" source "board/ronetix/pm9g45/Kconfig" diff --git a/board/mini-box/picosam9g45/Kconfig b/board/mini-box/picosam9g45/Kconfig new file mode 100644 index 0000000..98ec0c4 --- /dev/null +++ b/board/mini-box/picosam9g45/Kconfig @@ -0,0 +1,12 @@ +if TARGET_PICOSAM9G45 + +config SYS_BOARD + default "picosam9g45" + +config SYS_VENDOR + default "mini-box" + +config SYS_CONFIG_NAME + default "picosam9g45" + +endif diff --git a/board/mini-box/picosam9g45/MAINTAINERS b/board/mini-box/picosam9g45/MAINTAINERS new file mode 100644 index 0000000..3e3e2a9 --- /dev/null +++ b/board/mini-box/picosam9g45/MAINTAINERS @@ -0,0 +1,6 @@ +PICOSAM9G45 BOARD +M: Erik van Luijk evanluijk@interact.nl +S: Maintained +F: board/mini-box/picosam9g45/ +F: include/configs/picosam9g45.h +F: configs/picosam9g45_mmc_defconfig diff --git a/board/mini-box/picosam9g45/Makefile b/board/mini-box/picosam9g45/Makefile new file mode 100644 index 0000000..bf6e8e3 --- /dev/null +++ b/board/mini-box/picosam9g45/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for mini-box PICOSAM9G45 (AT91SAM9G45) based board +# (C) Copytight 2015 Inter Act B.V. +# +# Based on: +# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop stelian@popies.net +# Lead Tech Design <www.leadtechdesign.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += picosam9g45.o +obj-y += led.o diff --git a/board/mini-box/picosam9g45/led.c b/board/mini-box/picosam9g45/led.c new file mode 100644 index 0000000..dc1013a --- /dev/null +++ b/board/mini-box/picosam9g45/led.c @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian@popies.net + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9g45.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> + +void coloured_LED_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable clock */ + writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + + at91_set_gpio_value(CONFIG_GREEN_LED, 1); +} diff --git a/board/mini-box/picosam9g45/picosam9g45.c b/board/mini-box/picosam9g45/picosam9g45.c new file mode 100644 index 0000000..afbd6ce --- /dev/null +++ b/board/mini-box/picosam9g45/picosam9g45.c @@ -0,0 +1,354 @@ +/* + * Board functions for mini-box PICOSAM9G45 (AT91SAM9G45) based board + * (C) Copyright 2015 Inter Act B.V. + * + * Based on: + * U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c + * (C) Copyright 2007-2008 + * Stelian Pop stelian@popies.net + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clk.h> +#include <asm/arch/at91sam9g45_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <linux/mtd/nand.h> +#include <atmel_lcdc.h> +#include <atmel_mci.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +#if defined(CONFIG_SPL_BUILD) +#include <spl.h> + +void at91_spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + at91_mci_hw_init(); +#endif +} + +#include <asm/arch/atmel_mpddrc.h> +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_DQMS_SHARED | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3); + + ddr2->rtr = 0x24b; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |/* 6*7.5 = 45 ns */ + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |/* 2*7.5 = 15 ns */ + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | /* 2*7.5 = 15 ns */ + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | /* 8*7.5 = 60 ns */ + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | /* 2*7.5 = 15 ns */ + 1 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | /* 1*7.5= 7.5 ns*/ + 1 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | /* 1 clk cycle */ + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); /* 2 clk cycles */ + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | /* 2*7.5 = 15 ns */ + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 16 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 14 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (1 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct atmel_mpddr ddr2; + unsigned long csa; + + ddr2_conf(&ddr2); + + /* enable DDR2 clock */ + writel(AT91_PMC_DDR, &pmc->scer); + + /* Chip select 1 is for DDR2/SDRAM */ + csa = readl(&mat->ebicsa); + csa |= AT91_MATRIX_EBI_CS1A_SDRAMC; + csa &= ~AT91_MATRIX_EBI_VDDIOMSEL_3_3V; + writel(csa, &mat->ebicsa); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2); + ddr2_init(ATMEL_BASE_DDRSDRC1, ATMEL_BASE_CS1, &ddr2); +} +#endif + +#ifdef CONFIG_CMD_USB +static void picosam9g45_usb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + + at91_set_gpio_output(AT91_PIN_PD1, 0); + at91_set_gpio_output(AT91_PIN_PD3, 0); +} +#endif + +#ifdef CONFIG_MACB +static void picosam9g45_macb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; + + /* Enable clock */ + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + + /* + * Disable pull-up on: + * RXDV (PA15) => PHY normal mode (not Test mode) + * ERX0 (PA12) => PHY ADDR0 + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA12) | + pin_to_mask(AT91_PIN_PA13), + &pioa->pudr); + + at91_phy_reset(); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA12) | + pin_to_mask(AT91_PIN_PA13), + &pioa->puer); + + /* And the pins. */ + at91_macb_hw_init(); +} +#endif + +#ifdef CONFIG_LCD + +vidinfo_t panel_info = { + .vl_col = 480, + .vl_row = 272, + .vl_clk = 9000000, + .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | + ATMEL_LCDC_INVFRAME_NORMAL, + .vl_bpix = 3, + .vl_tft = 1, + .vl_hsync_len = 45, + .vl_left_margin = 1, + .vl_right_margin = 1, + .vl_vsync_len = 1, + .vl_upper_margin = 40, + .vl_lower_margin = 1, + .mmio = ATMEL_BASE_LCDC, +}; + + +void lcd_enable(void) +{ + at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */ +} + +static void picosam9g45_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ + at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ + + at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ + at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ + at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + + gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; +} + +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> + +void lcd_show_board_info(void) +{ + ulong dram_size; + int i; + char temp[32]; + + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("(C) 2015 Inter Act B.V.\n"); + lcd_printf("support@interact.nl\n"); + lcd_printf("%s CPU at %s MHz\n", + ATMEL_CPU_NAME, + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + lcd_printf(" %ld MB SDRAM\n", dram_size >> 20); +} +#endif /* CONFIG_LCD_INFO */ +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bis) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI0); +} +#endif + +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_PICOSAM9G45; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_CMD_USB + picosam9g45_usb_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 4); +#endif +#ifdef CONFIG_MACB + picosam9g45_macb_hw_init(); +#endif +#ifdef CONFIG_LCD + picosam9g45_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, + PHYS_SDRAM_2_SIZE); +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); +#endif + return rc; +} + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 0); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 1); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 1); + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig new file mode 100644 index 0000000..4128193 --- /dev/null +++ b/configs/picosam9g45_defconfig @@ -0,0 +1,12 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_PICOSAM9G45=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h new file mode 100644 index 0000000..e3039c2 --- /dev/null +++ b/include/configs/picosam9g45.h @@ -0,0 +1,211 @@ +/* + * Configuration settings for the mini-box PICOSAM9G45 board. + * (C) Copyright 2015 Inter Act B.V. + * + * Based on: + * U-Boot file: include/configs/at91sam9m10g45ek.h + * (C) Copyright 2007-2008 + * Stelian Pop stelian@popies.net + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x23f00000 + +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_PICOSAM + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + +#define CONFIG_SYS_GENERIC_BOARD + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_LCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Enable the watchdog */ +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_HW_WATCHDOG + +/* + * Command line configuration. + */ + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_USB + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ +#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env + linux in mmc */ +#define FAT_ENV_INTERFACE "mmc" +/* + * We don't specify the part number, if device 0 has partition table, it means + * the first partition; it no partition table, then take whole device as a + * FAT file system. + */ +#define FAT_ENV_DEVICE_AND_PART "0" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mmcblk0p2 rw rootwait" +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ + "fatload mmc 0:1 0x22000000 zImage; " \ + "bootz 0x22000000 - 0x21000000" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SYS_USE_MMC + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#endif +#endif