Re: [U-Boot-Users] mpc8xx, pcmcia to CF, ide

9 Sep 2005


      Travis B. Sawyer wrote:
...
Travis B. Sawyer wrote:
...
Greetings u-boot'ers:
I've had pretty good luck with my little rpx classic board.
I've gotten pcmcia to work (albeit not flawlessly, I toasted
one of my pcmcia flash cards).
I've run into an interesting problem:  When using a pcmcia to
CF adapter, I can access the CF on an older CF card (16mb).
However, with newer cards (ranging from 32mb to 512mb), the
pcmcia driver gets 00's for all of the tuples.
Answering my own question:
The BCSR setup for pcmcia voltages occurs properly, but needed
a delay for the voltage to swing into action.
All is well, nothing to see here.
Thanx
Travis