Hi all,
On 29/04/2020 22:11, Simon Glass wrote:
Hi Tom,
On Wed, 15 Apr 2020 at 13:59, Tom Rini trini@konsulko.com wrote:
On Tue, Apr 14, 2020 at 08:23:10PM -0600, Simon Glass wrote:
Hi,
On Sun, 22 Mar 2020 at 21:16, Simon Glass sjg@chromium.org wrote:
At present the pinctrl nodes are not enabled in pre-relocation U-Boot so the UARTs do not correctly select the pinconfig to enable the UART pins. Fix this so that the U-Boot banner is printed.
This fixes serial output on rpi_3b_32b with the following config.txt options:
enable_uart=1 gpu_freq=250
Signed-off-by: Simon Glass sjg@chromium.org Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc)
Changes in v2:
- Update commit message
arch/arm/dts/bcm283x-u-boot.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
Any thoughts on this series? At present all my lab tests fail.
I don't know if the problem is my firmware is too old (and so works) or your firmware is too old (and so fails) or if there's some phase-of-the-moon problem. So while I'd like to know _why_ my 3B is fine and yours is not, we should just take this I suppose.
It should not harm anything.
For now I am unable to run rpi tests on mainline.
Sorry for being silent for such a long time. I'll have a look and provide a PR.
Regards, Matthias