30 Apr
2011
30 Apr
'11
9:53 p.m.
Dear Luca Ceresoli,
In message 4DA59B5E.5000105@comelit.it you wrote:
Usage: tftpsrv [<loadaddr>]This would be used almost like tftpboot, except no file name is specified on the commandline. <loadaddr> would default to the environment variable.
I see some user interface issues here:
- When and how do you terminate this command? After a successful download, ok. But how long do we wait for that? Forever? Or do we time out?
The TFTP client tries sending a RRQ packet TIMEOUT_COUNT times (default 10), spaced TIMEOUT msecs (default 5000) from each other. 50 seconds total by default.
Well - this requires that there actually _is_ a TFTP client which attempts to connect. But there is no guarantee that any such client is running at all, or that it can connect through firewalls, routers, etc.
So assuming we never see any incoming packets - how long will we wait?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
If all you have is a hammer, everything looks like a nail.