A few Rockchip ARMv7 SoCs use 0x60000000 as DRAM base address instead of the more common 0x0 DRAM base address used on AArch64 SoCs.
Add default options that should work for these ARMv7 SoCs. Same offsets as before are used, just below 64 MiB. Hex values have also been padded to improve alignment.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- arch/arm/mach-rockchip/Kconfig | 35 +++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 5aa9e0f1af3b..da20d3233fe3 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -637,40 +637,53 @@ source "arch/arm/mach-rockchip/rv1126/Kconfig" if ROCKCHIP_COMMON_STACK_ADDR && SPL_SHARES_INIT_SP_ADDR
config CUSTOM_SYS_INIT_SP_ADDR - default 0x3f00000 + default 0x63f00000 if SPL_TEXT_BASE = 0x60000000 + default 0x03f00000 if SPL_TEXT_BASE = 0x00000000
config SYS_MALLOC_F_LEN - default 0x10000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 + default 0x10000 if CUSTOM_SYS_INIT_SP_ADDR = 0x63f00000 + default 0x10000 if CUSTOM_SYS_INIT_SP_ADDR = 0x03f00000
config SPL_SYS_MALLOC_F_LEN - default 0x8000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 + default 0x8000 if CUSTOM_SYS_INIT_SP_ADDR = 0x63f00000 + default 0x8000 if CUSTOM_SYS_INIT_SP_ADDR = 0x03f00000
config TPL_SYS_MALLOC_F_LEN - default 0x4000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 + default 0x0800 if CUSTOM_SYS_INIT_SP_ADDR = 0x63f00000 + default 0x4000 if CUSTOM_SYS_INIT_SP_ADDR = 0x03f00000
config TEXT_BASE - default 0x00200000 if ARM64 + default 0x60200000 if SPL_TEXT_BASE = 0x60000000 + default 0x00200000 if SPL_TEXT_BASE = 0x00000000
config SPL_TEXT_BASE - default 0x0 if ARM64 + default 0x60000000 if ROCKCHIP_RK3036 || ROCKCHIP_RK3066 || \ + ROCKCHIP_RK3128 || ROCKCHIP_RK3188 || \ + ROCKCHIP_RK322X || ROCKCHIP_RV1108 + default 0x00000000
config SPL_HAS_BSS_LINKER_SECTION default y if ARM64
config SPL_BSS_START_ADDR - default 0x3f80000 + default 0x63f80000 if SPL_TEXT_BASE = 0x60000000 + default 0x03f80000 if SPL_TEXT_BASE = 0x00000000
config SPL_BSS_MAX_SIZE - default 0x8000 if SPL_BSS_START_ADDR = 0x3f80000 + default 0x8000 if SPL_BSS_START_ADDR = 0x63f80000 + default 0x8000 if SPL_BSS_START_ADDR = 0x03f80000
config SPL_STACK_R - default y if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 + default y if CUSTOM_SYS_INIT_SP_ADDR = 0x63f00000 + default y if CUSTOM_SYS_INIT_SP_ADDR = 0x03f00000
config SPL_STACK_R_ADDR - default 0x3e00000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000 + default 0x63e00000 if CUSTOM_SYS_INIT_SP_ADDR = 0x63f00000 + default 0x03e00000 if CUSTOM_SYS_INIT_SP_ADDR = 0x03f00000
config SPL_STACK_R_MALLOC_SIMPLE_LEN - default 0x200000 if SPL_STACK_R_ADDR = 0x3e00000 + default 0x200000 if SPL_STACK_R_ADDR = 0x63e00000 + default 0x200000 if SPL_STACK_R_ADDR = 0x03e00000
endif endif