Add siemens specific memory test. Enable it through Kconfig option SPL_CMT. The test is required from our HW team. It runs over temperature during many days: * must run indefinitively through the whole DDR area * must write/read/check all values
Signed-off-by: Enrico Leto enrico.leto@siemens.com Signed-off-by: Heiko Schocher hs@denx.de ---
board/siemens/capricorn/Kconfig | 7 + board/siemens/capricorn/Makefile | 1 + board/siemens/capricorn/spl.c | 5 + board/siemens/capricorn/spl_memory_test.c | 158 ++++++++++++++++++++++ board/siemens/capricorn/spl_memory_test.h | 7 + 5 files changed, 178 insertions(+) create mode 100644 board/siemens/capricorn/spl_memory_test.c create mode 100644 board/siemens/capricorn/spl_memory_test.h
diff --git a/board/siemens/capricorn/Kconfig b/board/siemens/capricorn/Kconfig index 371eca346e0..03a433df2aa 100644 --- a/board/siemens/capricorn/Kconfig +++ b/board/siemens/capricorn/Kconfig @@ -14,3 +14,10 @@ config IMX_CONFIG default "board/siemens/capricorn/imximage.cfg"
endif + + +config SPL_CMT + bool "Enable Siemens SPL RAM test" + depends on SPL + help + Enable SIemens SPL RAM test. diff --git a/board/siemens/capricorn/Makefile b/board/siemens/capricorn/Makefile index e8a24c448b9..b8350d96d04 100644 --- a/board/siemens/capricorn/Makefile +++ b/board/siemens/capricorn/Makefile @@ -8,6 +8,7 @@ obj-y += ../common/eeprom.o
ifdef CONFIG_XPL_BUILD obj-y += spl.o +obj-$(CONFIG_SPL_CMT) += spl_memory_test.o else obj-y += ../common/factoryset.o endif diff --git a/board/siemens/capricorn/spl.c b/board/siemens/capricorn/spl.c index 7ee2895b6d4..5865cde80b4 100644 --- a/board/siemens/capricorn/spl.c +++ b/board/siemens/capricorn/spl.c @@ -20,6 +20,7 @@ #include <asm/arch/iomux.h> #include <asm/gpio.h> #include <asm/arch/sys_proto.h> +#include "spl_memory_test.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -58,6 +59,10 @@ void spl_board_init(void) preloader_console_init();
puts("Normal Boot\n"); + +#if IS_ENABLED(CONFIG_SPL_CMT) + spl_siemens_memory_full_test(); +#endif }
void spl_board_prepare_for_boot(void) diff --git a/board/siemens/capricorn/spl_memory_test.c b/board/siemens/capricorn/spl_memory_test.c new file mode 100644 index 00000000000..84c97e7853c --- /dev/null +++ b/board/siemens/capricorn/spl_memory_test.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright Siemens AG 2020 + * + * SPL Full Memory Test + * - memory test through the full DDR area + * - refresh over temperature torture (write all, read all) + * + * Remark: + * This test has ran properly with the definition of the RAM sizes in board + * headers. Since these headers are removed it's necessary to set the correct + * values to PHYS_SDRAM_1_SIZE & PHYS_SDRAM_2_SIZE before to recompile. + * + * An alternative is to refactor the code to get the size info from system + * controller + */ + +#include <init.h> +#include <log.h> + +/* ----- Defines ----- */ +#define CHECK_LOWER_UPPER + +#define LEVEL2_PRINT 0x0FFFFFFF + +/* use 0x7FFF0000 for shorter loop test */ +#define BASE_OFFSET 0x00000000 + +/* ----- Types ----- */ +struct ct_t { + unsigned long *start; + unsigned long *end; +}; + +/* ----- Variables ----- */ +static struct ct_t ct; +static unsigned long error_counter; + +static void print_parameters(void) +{ + printf("\nstart addr: %p\n", ct.start); + printf("end addr : %p\n", ct.end); +} + +static void run_test(void) +{ + /* moved full test in one void */ + unsigned long *address; /* 512 */ + unsigned long ebyte1; + unsigned long ebyte2; + unsigned int i; + unsigned long rpattern; + + for (i = 0; i <= 255; i++) { + memset(&ebyte1, i, sizeof(ebyte1)); + ebyte2 = ~ebyte1; + printf("LWord: %016lx #LWord: %016lx\n", ebyte1, ebyte2); + + /* write all bytes -> duration ~ 150 s */ + for (address = ct.start; address <= ct.end; address++) { +#ifdef LEVEL2_PRINT + if (((unsigned long)address & LEVEL2_PRINT) == 0) + printf("write to %p - %p\n", address, + (void *)((unsigned long)address + + LEVEL2_PRINT)); +#endif + *address = ebyte1; + address++; + *address = ebyte2; + } + + /* check all bytes */ + for (address = ct.start; address <= ct.end; address++) { +#ifdef LEVEL2_PRINT + if (((unsigned long)address & LEVEL2_PRINT) == 0) + printf("check from %p - %p\n", address, + (void *)((unsigned long)address + + LEVEL2_PRINT)); +#endif + + rpattern = *address; + if (rpattern != ebyte1) { + error_counter++; + printf("Error! Read: %016lX Wrote: %016lX Address: %p\n", + rpattern, ebyte1, address); + } + + address++; + rpattern = *address; + if (rpattern != ebyte2) { + error_counter++; + printf("Error! Read: %016lX Wrote: %016lX Address: %p\n", + rpattern, ebyte2, address); + } + } + } +} + +#ifdef CHECK_LOWER_UPPER +void test_lower_upper(void) +{ + /* + * write different values at the same address of both memory areas + * and check them + */ +#define TEST_ADDRESS 0x12345670UL +#define LOWER_ADDRESS (PHYS_SDRAM_1 + TEST_ADDRESS) +#define UPPER_ADDRESS (PHYS_SDRAM_2 + TEST_ADDRESS) +#define LOWER_VALUE 0x0011223344556677 +#define UPPER_VALUE 0x89ab89abffeeddcc + + *(unsigned long *)LOWER_ADDRESS = LOWER_VALUE; + *(unsigned long *)UPPER_ADDRESS = UPPER_VALUE; + + puts("\nlower-upper memory area test\n"); + printf("write %016lx to lower address %010lx\n", LOWER_VALUE, + LOWER_ADDRESS); + printf("write %016lx to upper address %010lx\n", UPPER_VALUE, + UPPER_ADDRESS); + printf("read %016lx from lower address %010lx\n", + *(unsigned long *)LOWER_ADDRESS, LOWER_ADDRESS); + printf("read %016lx from upper address %010lx\n", + *(unsigned long *)UPPER_ADDRESS, UPPER_ADDRESS); +} +#endif + +void spl_siemens_memory_full_test(void) +{ + unsigned long loopc = 0; + + puts("\nSPL: memory cell test\n"); + +#ifdef CHECK_LOWER_UPPER + if (PHYS_SDRAM_2_SIZE != 0) + test_lower_upper(); +#endif + + while (true) { + /* imx8x has 2 memory areas up to 2 GB */ + + /* 1st memory area @ 0x80000000 */ + ct.start = (unsigned long *)(PHYS_SDRAM_1 + BASE_OFFSET); + ct.end = (unsigned long *)(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - 1); + print_parameters(); + run_test(); + + /* 2nd memory area @ 0x880000000 */ + if (PHYS_SDRAM_2_SIZE != 0) { + ct.start = (unsigned long *)(PHYS_SDRAM_2 + BASE_OFFSET); + ct.end = (unsigned long *)(PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE - 1); + print_parameters(); + run_test(); + } + + loopc++; + printf("loop: %ld, errors: %ld\n\n", loopc, error_counter); + }; +} diff --git a/board/siemens/capricorn/spl_memory_test.h b/board/siemens/capricorn/spl_memory_test.h new file mode 100644 index 00000000000..28df284b6d5 --- /dev/null +++ b/board/siemens/capricorn/spl_memory_test.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright Siemens AG 2020 + * + */ + +void spl_siemens_memory_full_test(void);