hi Christian,
On Mon Feb 27, 2012 at 11:39:42AM +0100, Christian Riesch wrote:
Hi,
On Mon, Feb 27, 2012 at 11:16 AM, Sughosh Ganu urwithsughosh@gmail.com wrote:
<snip>
arch/arm/cpu/arm926ejs/davinci/spl.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c index b1eff26..2861907 100644 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -32,10 +32,12 @@
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+#ifdef CONFIG_SPL_SPI_LOAD DECLARE_GLOBAL_DATA_PTR; /* Define global data structure pointer to it*/ static gd_t gdata __attribute__ ((section(".data"))); static bd_t bdata __attribute__ ((section(".data"))); +#endif
<snip>
Can you specify which boards you get this warning for. With your patch to add libcommon to hawkboard's spl image, this is now also needed for hawkboard which uses CONFIG_SPL_NAND_LOAD.
Simon's patch is for the hawkboard, since due to another patch in his patchset LIBCOMMON is enabled in hawkboard's SPL. Now we have a board that boots from NAND with SPL and has LIBCOMMON enabled (Simon, I did not check the rest of your patchset, why do you need LIBCOMMON on the hawkboard at all?)
LIBCOMMON is now needed as the generic relocation based functions are part of the libcommon.o, which are being enabled in the same patchset for all arm boards. So if i understand correct, all arm board based spl's now need libcommon and libgeneric.
The only thing i see is that libcommon and libgeneric are not defined for cam_enc_4xx board which uses spl, and this patchset does not add it either. Not sure whether it got missed.
However, the patch fixes the warning, but now we use putc and puts from LIBCOMMON without initializing them. Thus it breaks the console output of the hawkboard SPL.
So the correct solution would be to keep the ifdefs around the definition of gdata and bdata as they are, but change board_init_f() like this:
I have a patch for this, which i will send today. There is only one question i have though.
void board_init_r(gd_t *id, ulong dummy) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
Can you please explain why we need the mem_malloc_init. I did not include this, and spl boots up just fine on my board.
-sughosh