From: Otavio Salvador otavio@ossystems.com.br
This adds the boot mode support for i.MX23 processors.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Marek Vasut marex@denx.de Cc: Stefano Babic sbabic@denx.de --- arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 1b8502e..7e70440 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -51,12 +51,21 @@ void early_delay(int delay)
#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) static const iomux_cfg_t iomux_boot[] = { +#if defined(CONFIG_MX23) + MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +#elif defined(CONFIG_MX28) MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +#endif };
static uint8_t mxs_get_bootmode_index(void) @@ -68,6 +77,21 @@ static uint8_t mxs_get_bootmode_index(void) /* Setup IOMUX of bootmode pads to GPIO */ mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
+#if defined(CONFIG_MX23) + /* Setup bootmode pins as GPIO input */ + gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); + gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); + gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2); + gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3); + gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5); + + /* Read bootmode pads */ + bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; +#elif defined(CONFIG_MX28) /* Setup bootmode pins as GPIO input */ gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); @@ -83,6 +107,7 @@ static uint8_t mxs_get_bootmode_index(void) bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; +#endif
for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { masked = bootmode & mxs_boot_modes[i].boot_mask;